Exaduro Blanco Cerámico

Exaduro Ceramic White

210070001
€8.00
9,68 € IVA incl.
  • Very high strength and low absorption gypsum.
  • Ideal for the manufacture of models that require great hardness.
  • Perfect for molds at FX.
 

Exaduro gypsum (plaster) is a calcium sulfate derivative indicated for the manufacture of models requiring high hardness and matrices in the ceramic industry and casting of figures.

MIXTURE: We recommend the gypsum/water ratio indicated below. Working with less water increases the resistances, but the time available for casting will be shorter.

Pour the plaster into the water (never the other way around), let it moisten and knead for about one minute, beating gently and uniformly to avoid the formation of air bubbles. The containers should be clean.

It is important to keep the water and plaster in an environment with temperature within the mentioned range before use.

The higher the water temperature, the shorter the setting time.

STORAGE: In dry places on wooden battens, separating the different rows from each other and from the wall so that air can circulate freely. In this way the plaster can be stored for months while retaining its properties.

TECHNICAL DATA:
Mixing ratio: 2.50 kg of gypsum per 1 liter of water.
Water factor (Wf): 0,40
Setting time: 8-10 minutes
Demolding: After 30 minutes
Setting expansion: 0,25 %
Brinell hardness: 1.300 Kg/cm2 ( 130 N/mm2)
Color: White
GRANULOMETRIC DISTRIBUTION:
Greater than 200 microns: Traces
Greater than 86 microns: 0,5 %
SOLUBILITY OF THE DIHYDRATE AT 20 ºC: 2.1 g/liter

PDF_LITE25.png TECHNICAL DATA SHEET
PDF_LITE25.png SAFETY DATA SHEET

No reviews

You might also like

Product added to wishlist
Cookie consent