The 28 cm fiberglass scissors are a cutting tool specifically designed for working with fiberglass mats, fabrics and fibres. The long, sharp blade delivers clean cuts without fraying the material, and the straight blue handle with non-slip grip is comfortable for both right- and left-handed users.
Technical specifications
| Total length | 28 cm |
|---|
| Handle type | Straight |
|---|
| Colour | Blue |
|---|
| Recommended cutting materials | Fiberglass mats and fabrics |
|---|
| Handedness | Suitable for both hands |
|---|
| Grip | Non-slip |
|---|
What it is used for
These scissors are designed for the precise cutting of textile reinforcements used in lamination with polyester, vinylester and epoxy resins. The 28 cm size allows you to cover large pieces with fewer passes, reducing material preparation time before laminating.
- Cutting fiberglass mat for reinforcement laminates
- Cutting fiberglass fabric for surface finishes
- Cutting carbon fibre fabric and other technical reinforcements
- Preparing repair patches for bodywork, nautical hulls and industrial parts
- Adjusting templates and shapes in custom composites
- Use in FX workshops to prepare reinforcements for moulds and counter-moulds
How to use it
- Lay the fabric or mat out on a flat, clean surface.
- Mark the desired shape with a marker or template before cutting.
- Hold the material with one hand and position the scissors at the starting point of the cut.
- Cut with long, continuous strokes, making full use of the blade length to achieve clean edges.
- For tight curves, make shorter cuts and rotate the material rather than forcing the blade.
- After use, clean the blades with a dry cloth to remove residual fibres and extend the tool's service life.
Usage tips
How to prevent fraying when cutting
Fraying is the most common problem when cutting fiberglass or carbon fibre fabrics. To minimise it, make sure the blade is always sharp and complete the cut in a single continuous motion without stopping mid-stroke. On fine fabrics, you can secure the edge with masking tape before cutting and remove it afterwards.
Scissors maintenance
Fiberglass fibres are abrasive and can dull the blade with intensive use. Clean the blades after each working session and apply a drop of mineral oil to the pivot joint to keep the action smooth. Store the scissors protected to avoid damage to the cutting edge.
Workshop colour-coding
The blue colour of these scissors is not just aesthetic: it makes quick identification easier in workshop environments where multiple cutting tools are in use. Assigning each colour to a specific material type (fiberglass, fabric, film, etc.) prevents cross-contamination and keeps your workflow organised.
Frequently asked questions
Are these scissors suitable for cutting carbon fibre?
Yes. These 28 cm scissors are suitable for carbon fibre fabrics, although carbon fibre is more abrasive than fiberglass, so the blade may require more frequent maintenance with intensive use.
Can a left-handed person use them?
Yes. The straight, symmetrical handle of these scissors allows comfortable use for both right- and left-handed users, without needing to force an awkward hand position.
Are they suitable for cutting fiberglass mat?
Yes. They are the ideal tool for cutting fiberglass mat. The 28 cm length makes it easy to section large pieces comfortably. Pair them with Feroca's Fiberglass Mat Reinforcement 300 grm.
What advantage do specialist scissors have over general-purpose scissors?
Fiberglass scissors have blades with geometry and steel optimised for abrasive technical materials. General-purpose scissors dull quickly with these materials and produce uneven cuts with fraying. Specialist scissors offer greater durability and cleaner cuts.
How do you clean them properly after use?
Remove accumulated fibres from the blades with a dry cloth or a stiff-bristle brush. If there is resin adhered in a green state (not fully cured), you can remove it with acetone before it cures completely. Once clean, apply a drop of oil to the pivot to keep the action smooth.
Where can I buy these scissors and other composite materials at Feroca?
You can purchase them at the Feroca online store or at its physical shops: Feroca Madrid (Calle Españoleto, 11 - 28010 Madrid) and Feroca Fuenlabrada (Sierra Elvira, 22 - 28946 Fuenlabrada).
What other tools do I need to laminate with fiberglass?
