- Feroca
- Cosplay
- 0 likes
- 357 views
- 0 comments
Halloween with a group of friends has a classic problem: everyone buys their own make-up, nobody has skin glue and at nine o'clock at night someone is still walking around with a wound drawn on in lipstick. Feroca's Kit Halloween is designed for the opposite: with a single box you can transform 5 people with 5 different horror looks, using professional special effects materials and everything you need to apply them and to remove them afterwards. In this guide we suggest one look for each person and explain how to do it step by step.
What the kit includes
The kit brings together four types of material: ready-made pieces (transfers, horns and FX tattoos), a silicone for sculpting wounds directly on the skin, medical-grade adhesives and pigmented bloods for realism. This is how each component is shared out across the 5 looks:
| Component | What you use it for |
|---|---|
| Skin Imitator 30 g + small spoon | Skin-safe silicone for sculpting raised scars and wounds. It cures in 5-7 minutes on the skin |
| Transfer kit (5 wounds) | Ready-made wounds that stick on in minutes. There is one per person |
| Horn sheet | Horn prosthetics for the demon look |
| Tatú FX strip | Special effects temporary tattoo applied with water |
| FX glass 20 g | Fake glass fragments for the cuts look |
| Pros-Aide 10 g and Pros-Aide Cream 15 g | Medical-grade adhesives: the liquid sticks the pieces down and the cream fills and hides the joins |
| Acore FX Skin Palette | Alcohol-activated palette with 6 skin tones to blend the pieces in and add colour to the looks |
| Isopropyl alcohol (IPA) 50 ml | Activates the alcohol palette and helps remove the Tatú FX |
| Scab Paste blood 15 g | Granular blood paste for scabs and wounds that have been open for a while |
| Aged Dark blood 15 ml | Dark liquid blood that does not dry: it keeps a wet look all night long |
| Isopropyl Myristate 100 ml | Oily remover for taking off adhesives, pieces and make-up without irritating the skin |
| AC-1 Acetone 50 ml | For cleaning the mixing palette and the tools. Never on the skin |
| Stainless steel palette, toothpick and stick | For mixing and sculpting the silicone, and placing scabs and glass precisely |
Before you start: skin test and order of work
Do a patch test. A few days beforehand, apply a little of each adhesive and of the silicone to each person's forearm and wait 24 hours. These are professional materials made for use on skin, but everyone's skin is different and it is better to find out before the party than during it.
Start with the longest looks. If you are doing the make-up for the whole group yourself, start with the looks that use silicone or prosthetics (scars, glass cuts and demon) and leave the transfer look, which is the quickest, until last. That way everyone waits as little as possible and nobody arrives at the party with their blood already smudged.
Clean, dry skin. Ask everyone to come with a freshly washed face, with no moisturiser or make-up. Adhesives and silicone grip much less well on oily skin.
Look 1 — Healed scars
This is the most elegant look of the group: there is no blood and it goes with any costume, from a mobster to a character from a classic horror film.
- Mark the path. Decide where the scars will run: diagonally across the cheek, crossing the eyebrow or running down towards the chin.
- Prepare the Skin Imitator. Mix a small amount on the stainless steel palette following the instructions on the pack. Mix only a little at a time: it cures in 5-7 minutes.
- Sculpt the lines. Using the stick, lay the silicone on the skin in thin beads and, before it cures, open a groove down the middle of each bead with the edge of the stick. That groove is what gives it the look of a scar.
- Blend the edges. Smooth the ends of the silicone against the skin so you cannot tell where it starts and where it ends.
- Add colour. Activate the Acore FX Skin Palette with a few drops of isopropyl alcohol and match the silicone to the skin tone. Then add a touch of a pinkish shade inside the groove so it looks like a recent scar.
Look 2 — Glass cuts
The "accident with a pane of glass" look is the most striking of the five and the one that gets the most photos at any party.
- Create the cuts. With Skin Imitator, make small, short beads grouped in one area of the face, all running in the same direction, and open them with the stick as in the previous look.
- Place the glass. Before the silicone cures, use the stick to place the FX glass inside some of the cuts so it looks embedded. If any fragment ends up on skin without silicone, fix it with a dot of Pros-Aide.
- Redden the area. Using the pinkish shades of the alcohol palette, add an irritated flush around the cuts: the skin around a wound is never its normal colour.
- Add the blood. Fill the bottom of the cuts with Aged Dark blood and, for the splatter, load a brush and flick it sharply with your finger towards the face and neck.
Look 3 — Infected skin
Freshly bitten zombie, possessed or plague victim: what sells this look is the colour of the skin, more than the wounds.
- Apply the Tatú FX. Cut out the design you want to use from the strip, place it face down on the skin and dampen the paper until it comes away on its own. Remove it carefully and leave to dry.
- Make the skin tone look sick. With the alcohol palette, dull the natural colour with the light shades and mark dark circles with the darker ones. Dab it on with a sponge without covering completely: sick skin is blotchy, not an even colour.
- Make the neck wound. Apply a layer of Pros-Aide Cream on the bite area to give it volume and, on top, the Scab Paste with the stick. Its granular texture and matte finish imitate a scab.
- Finish with blood. A trickle of Aged Dark blood running from the scab gives it the look of a wound that is still open.
If you want to take this look further, the Tatú FX range also has individual designs such as Infected Veins or Zombie Skin.
Look 4 — Horned demon
A classic that never fails. The difference between costume horns and horns that seem to grow out of the skin lies in how you hide the join.
- Position the horns. Place the pieces from the sheet on the forehead, one on each side, without sticking them, and decide on the exact position. Keep them symmetrical in relation to the nose.
- Stick them with Pros-Aide. Apply Pros-Aide to the base of each horn and to the skin, let both layers turn from white to clear and press the piece on for a few seconds.
- Hide the join. Fill the edge between horn and skin with Pros-Aide Cream and smooth it with the damp stick until the step can no longer be seen.
- Blend in the colour. With the alcohol palette, give the base of each horn a reddish, irritated tone, as if the skin had split open to let it out, and stipple dark freckles across the forehead.
- Complete the character. Red and black eyeliner and dark lips: the beauty make-up does half the work.
Look 5 — Express wound with a transfer
The fifth look is for whoever arrives late or has the least patience: in just a few minutes they have a raised wound without having to sculpt anything.
- Choose the wound. Pick one of the transfers in the kit and decide where it looks best: cheek, forehead, neck or forearm.
- Apply it. Follow the instructions on the transfer itself to transfer it to the skin. If any edge lifts, fix it with a dot of Pros-Aide.
- Blend in the colour. Go over the edges with the alcohol palette to blend the wound into the surrounding skin tone.
- Bring it to life. A few drops of Aged Dark blood in the centre of the wound and you're done.
As the kit comes with 5 transfers, you can also use any spare ones to complete the other looks: an extra cut on the demon or a second wound on the infected person.
How to remove everyone's make-up
At the end of the night, no pulling the horns off and no scrubbing the silicone with soap and water:
- Prosthetics, silicone and adhesive: soak the edges with Isopropyl Myristate and wait for the adhesive to release before lifting the piece off little by little.
- Tatú FX: removed with Isopropyl Myristate or with isopropyl alcohol.
- Bloods: Scab Paste and Aged Dark come off the skin with soap and water. For clothes, wash at 40 °C with detergent.
- Tools: the stainless steel palette and the sticks are cleaned with acetone. Acetone is only for the tools, never for the skin.
If Halloween has given you the special effects bug, the natural next step is the SFX Starter Kit, with which you can make your own silicone prosthetics from scratch. And if you want to see all the Halloween products in one place, take a look at our Halloween make-up and effects page.
What other looks can you think of?
These five looks are just a starting point. With the same materials you can create vampires, mummies, werewolf victims, burn victims or any creature you can imagine. What other make-up looks would you do with this kit?
If you use our kit, we would love to see the results: send us your photos or tag us on social media.
- Instagram: @feroca.soluciones
- Facebook: Feroca Soluciones
- YouTube: Feroca Vídeos
- X (Twitter): @feroca
Frequently asked questions
How many people does a Halloween make-up kit cover?
Feroca's Kit Halloween is designed to make up 5 people with 5 different looks. It contains 5 wound transfers, a horn sheet, silicone for sculpting wounds, adhesives, two types of blood, an alcohol-activated palette and the make-up remover.
Can silicone be applied directly to the skin?
Only if it is a silicone formulated for that purpose. Skin Imitator is a skin-safe platinum silicone that cures in 5-7 minutes and is used to sculpt wounds and scars directly on the face. Always do a patch test on the forearm a few days beforehand.
What glue is used to stick horns and prosthetics to the skin?
A medical-grade adhesive such as Pros-Aide, the industry standard in film and television. It is water-based, water-resistant and suitable for sensitive skin. Its cream version, Pros-Aide Cream, is used to fill and hide the join between the piece and the skin.
Does fake blood stain clothes?
The bloods in the kit, Aged Dark and Scab Paste, come off the skin with soap and water, and off fabrics with a 40 °C wash with detergent. Even so, it is best not to wear your best clothes with them.
How do you remove prosthetics and special effects make-up?
With an oily remover such as Isopropyl Myristate: soak the edges of the piece, wait for the adhesive to release and lift it off little by little. Never pull a prosthetic off dry or use acetone on the skin.
How do you activate an alcohol-based make-up palette?
With a few drops of isopropyl alcohol on the brush or sponge: the pigment dissolves and is applied in thin layers, and once dry it withstands rubbing and sweat. The Acore FX Skin Palette in the kit has 6 skin tones for blending in pieces and creating effects. If you want to know more, read our guide to Acore FX palettes.
Comments (0)