• On sale!
  • -20%
TinSil 80-15 -Silicona para moldes-

TinSil 80-15 -Silicone for molds-

290056120
Temporarily out of stock
€380.80
460,77 € IVA incl. €476.00 -20%
  • Silicone elastomer for polyester, polyurethane and epoxy.
  • Excellent properties and high chemical and mechanical resistance.
  • Available in 2 different hardnesses.
  • Replaces Silastic 3483 improving its properties.
capacity
  • Kit of 1 Kg.
  • Kit of 5 Kg.
  • Kit of 20 kg.


 

Series 80 silicone rubbers from TinSil are two-component room temperature cure (RTV) rubbers. The TinSil silicone uses a tin catalyst (condensation) and cures to a soft, medium-hard, flexible rubber. These silicones offer reduced shrinkage during cure and during casting, longer pot life after cure and longer mold life than other tin-cured systems.

Molds made with TinSil rubber have high tear strength, good mold release properties, high temperature resistance, and excellent chemical resistance. These molds are an excellent choice for cast parts in polyester, epoxy, polyurethane, polyurethane foams, gypsum, waxes and many other materials.

Silicone TinSil is very easy to use, and is available in two different hardnesses, the TinSil 80-15 or the TinSil 80-30 whose characteristics you can compare in this table:

TECHNICAL DATA TinSil 80-15 TinSil 80-30
Mixing ratio A:B (A is catalyst) 10A:100B by weight 10A:100B by weight
Color: Peach (Light Pink) Peach (Light Pink)
Working time: 30 Minutes 45 minutes
Time of demolding: 24 Hours 24 hours
Resistance to elongation 503 % 383%
Shore Hardness: A15 A30
Viscosity of the mixture: 12,000 cps 17,000 cps
Tear strength: 87 pli 145 pli
Density: 1.1 1.17
Shrinkage on cure: ~0.2% ~0.2%

IMPORTANT: Stir the catalyst (Part A) thoroughly at each use to homogenize the pigment load it carries.

Kit composition:

1 Kg Kit - Total 1.1Kg - 100gr Catalyst + 1Kg Base

Kit of 5 Kg - Total 5,5Kg - 500gr Catalyst + 5Kg Base

Kit of 20 Kg - Total 22 Kg - 2Kg Catalyst + 20Kg Base

PDF_LITE25.png TECHNICAL DATA SHEET
PDF_LITE25.png SAFETY DATA SHEET PART A
PDF_LITE25.png SAFETY DATA SHEET PART B

Color
Peach
Working Time
30min
Curing Time
24horas
Shore Hardness
A15
Mixed Weight Ratio
10A:100B
Silicones
Condensation (Tin)
No reviews

You might also like

Plastilina Plastilina 2
Professional Plastilinas.

Industrial Plasticine - Vegetable base

204300350
€3.80
4,60 € IVA incl.
Vegetable-based plasticine to make two-part molds. Tablet of 350gr. Contains sulfur, do not use in contact with platinum catalyst silicones.
Product added to wishlist
Cookie consent