Shopping Cart
```html
```
Dark Sea Blue (AK11190) is an acrylic paint from the AK Interactive Standard range, formulated with high pigmentation and a water base to provide uniform coverage and a solid colour from the very first coat. Available in a 17 ml bottle, it is designed for both brush and airbrush application, and adapts to a wide variety of modelling, miniature painting and artistic effects projects. Feroca is the official AK Interactive distributor in Spain, so you are guaranteed an authentic product with direct availability.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11190 |
| Colour name | Dark Sea Blue |
| Range | Standard |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Application | Brush and airbrush |
| Finish | Satin / Matte depending on application |
What it is used for
Dark Sea Blue is a versatile colour with a dark navy blue tone and a greenish hue that fits a multitude of modelling and artistic painting contexts. It is especially useful for:
- Scale naval vessels and submarines, both modern and from World War II
- Military aircraft with oceanic or low-visibility camouflage schemes
- Wargame miniatures requiring uniforms, armour or equipment in navy blue tones
- Dioramas with maritime or underwater settings
- Backgrounds and base coats in special effects (SFX) and cosplay projects
- Scenery and terrain elements for role-playing or wargame sessions
How to use it
- Surface preparation: Make sure the piece is clean, free of grease and properly primed. A grey or black primer enhances the depth of Dark Sea Blue.
- Shaking: Shake the bottle well for at least 30 seconds before opening. The agitator ball inside helps homogenise the pigment.
- Thinning: For brush application, it can be used straight from the bottle or thinned with a few drops of distilled water or AK acrylic thinner. For airbrush use, thin it until you achieve a consistency similar to skimmed milk.
- Application: Apply in thin, even coats. It is preferable to apply two or three light coats rather than a single thick one to avoid losing detail.
- Drying: Touch-dry time is approximately 15–20 minutes under normal conditions. Wait at least one hour before applying additional coats or varnishes.
- Cleaning: Clean brushes and airbrush with water and soap or with water-based acrylic thinner immediately after use. Do not let the paint dry on your equipment.
Usage tips
Make the most of lights and shadows with Dark Sea Blue
This colour has a dark tone that makes it easy to create natural shadows without needing to add black. For highlights, gradually mix in a lighter blue or a cool grey. Work the transitions with diluted glazes to achieve a smooth and realistic finish.
Combining with washes and filters
Over a Dark Sea Blue base coat, a dark navy or bluish-black wash enhances recesses and adds visual depth to surfaces with relief, such as ship hulls, vehicle panels or fabric textures on figures. Bluish or greenish filters over this base help simulate moisture and marine weathering effects.
Airbrush use for large surfaces
If you are working with large-scale ship or vehicle models, the airbrush is the most efficient tool. Thin the paint in a 1:1 ratio with acrylic thinner and apply at low pressure (10–15 PSI) for homogeneous coverage without brushstroke marks or orange-peel effect.
Frequently asked questions
Do I need a primer before applying this paint?
It is always recommended to use a primer, especially on plastic or resin surfaces. Dark Sea Blue (AK11190) adheres better and the colour gains depth when applied over a primed surface. A black or dark grey primer is the most common choice for tones of this type.
Can it be used straight from the bottle without thinning?
Yes, the AK Interactive Standard range is formulated to be used straight from the bottle with a brush without any mandatory thinning. However, if you are looking for glazes or want to work with an airbrush, it is advisable to add a few drops of distilled water or acrylic thinner to adjust the consistency.
Is it compatible with varnishes and weathering effects?
Yes. Once the Dark Sea Blue coat is dry and cured, you can apply satin or matte varnishes, washes, pigments and weathering effects without any issues. It is recommended to protect the base coat with a varnish before applying washes to make removal easier if needed.
How long does it take to dry completely?
Touch-dry time is around 15–20 minutes. However, to work safely on top — especially with washes or masking — it is best to wait between 1 and 2 hours. Full curing can take up to 24 hours under standard temperature and humidity conditions.
How do I lighten or darken this tone?
To lighten Dark Sea Blue you can mix it with cool greys or whites in small proportions. To darken it, add black or an intense navy blue. All mixes are easily achieved within the AK Interactive Standard range itself, as the water-based acrylic base is fully compatible between colours.
Where can I buy this paint with an official guarantee?
Feroca is the official AK Interactive distributor in Spain, so purchasing Dark Sea Blue (AK11190) through Feroca guarantees an authentic product, up-to-date stock and specialised support for any technical queries.
No reviews
Tap to zoom
