Shopping Cart
```html
```
Deep Blue (AK11182) is a water-based acrylic paint from AK Interactive's Standard range, formulated with a high pigment concentration to deliver a deep, high-coverage blue. With 17 ml per bottle, it is ideal for both brush and airbrush application, and fits perfectly into scale model, miniature and diorama projects where a consistent and reproducible tone is needed. Feroca is the official AK Interactive distributor in Spain, so you get guaranteed authentic product and permanent stock.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11182 |
| Colour name | Deep Blue |
| Range | Standard |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Finish | Satin / Matte depending on colour |
| Application | Brush and airbrush |
| Thinner | Water or AK Interactive acrylic thinner |
| Cleaning | Water (wet) / acrylic thinner |
What it is used for
Deep Blue is a versatile shade that covers a wide spectrum of applications in the world of scale modelling and visual arts. Its high pigmentation allows you to achieve full coverage in just a few coats and obtain uniform results on different prepared surfaces.
- Life jackets, naval uniforms and military equipment on ship and vehicle scale models.
- Base coats and shading on wargame miniatures, especially on marine units, infantry or fantasy figures.
- Oceans, rivers and water masses in dioramas and scenery bases.
- Clothing details, armour or decorative elements on resin and plastic figures.
- Prop elements and finishes for cosplay projects or small-scale SFX props.
- Custom mixes to achieve cooler or warmer blues by combining it with other colours from the Standard range.
How to use it
- Surface preparation: Apply a compatible primer (acrylic or spray) to improve adhesion. Make sure the surface is clean, dry and free of grease.
- Shaking: Shake the bottle well for at least 30 seconds before opening. The inner mixing ball helps to homogenise the pigments.
- Thinning: For brush application, use the paint straight from the bottle or thin it slightly with water or AK Interactive acrylic thinner. For airbrush, adjust the consistency until you achieve a fluidity similar to skimmed milk.
- Application: Apply in thin, successive coats. Allow each coat to dry completely before applying the next to avoid lifting the previous layer.
- Drying: Touch-dry time is approximately 15–30 minutes under normal conditions. Full curing may take several hours.
- Cleaning: Clean brushes and the airbrush with warm water immediately after use. If the paint has started to dry, use AK Interactive acrylic thinner.
Usage tips
Thin coats for greater control
Although Deep Blue has high coverage, working with thin layers gives you more control over the final finish. Several thin coats are always preferable to one thick coat, as they prevent loss of detail on raised areas and engravings.
Shadows and highlights from the same base
To maintain chromatic consistency on a miniature or figure, mix Deep Blue with a darker shade (black or navy blue from the Standard range) for the shadows, and with a lighter shade or white for the highlights. This way you achieve a natural tonal range without changing the base colour.
Compatibility with varnishes and effects
Once dry, Deep Blue is fully compatible with AK Interactive matte, satin and gloss varnishes, as well as the brand's weathering products. If you are going to apply washes or filters on top, always use an intermediate varnish to protect the base layers.
Frequently asked questions
Do I need to thin the paint before using it with a brush?
It depends on the result you are looking for. Deep Blue (AK11182) has a consistency suitable for direct brush application from the bottle, but if you want more transparent layers or to work on fine detail areas, a slight thinning with water or acrylic thinner improves flow and stroke control.
Can it be used with an airbrush?
Yes. Deep Blue is compatible with airbrush. Simply thin it a little more than for brush use, until you achieve the right consistency for the needle and compressor you are using. It is recommended to clean the airbrush with warm water or AK Interactive acrylic thinner immediately after use.
What primer is recommended before applying this paint?
Any AK Interactive acrylic or spray primer is compatible with Deep Blue. For maximum colour intensity, a grey or white primer is the most common choice; if you are looking for a darker and deeper blue, a black primer will work well as a base.
How long does it take to dry?
Under normal temperature and humidity conditions, Deep Blue is touch-dry in approximately 15–30 minutes. To safely apply a second coat, wait at least 30 minutes. Full curing, which is the optimal moment to apply varnishes or effects on top, may take several hours.
Is it suitable for use on resin and plastic?
Yes, Deep Blue adheres well to resin and plastic as long as the surface is correctly primed. On unprimed plastic the adhesion may be uneven, so it is recommended not to skip the priming step.
Where can I buy this paint with a guarantee of an original product?
Feroca is the official AK Interactive distributor in Spain, so purchasing Deep Blue (AK11182) through Feroca guarantees an authentic product, up-to-date stock and specialised technical support.
No reviews
Tap to zoom
