Shopping Cart
```html
```
Blue-Green (AK11169) is an acrylic paint from the Standard range by AK Interactive, formulated with high pigmentation to provide solid and uniform coverage in one or two coats. Its water-based formula makes cleaning and mixing easy, while its fluid texture makes it suitable for both brush and airbrush. At Feroca, official distributor of AK Interactive in Spain, it is available in a 17 ml format.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11169 |
| Colour name | Blue-Green |
| Range | Standard |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Finish | Satin / Matte (depending on dilution and coat) |
| Application | Brush and airbrush |
What it is used for
Blue-Green is a versatile shade covering a wide range of applications within scale modelling and creative arts. Its intermediate character between blue and green makes it a key colour for backgrounds, uniforms, military vehicles, and natural or industrial surfaces.
- Painting military and naval vehicles with camouflage schemes that include bluish or greenish tones
- Marine infantry uniforms, naval forces, or modern elite units
- Helmets, armour, and equipment pieces on wargame miniatures
- Oxidation effects and patinas on metallic surfaces in dioramas
- Painting scales, alien skins, or fantastic creatures on fantasy and science fiction miniatures
- Base coat or intermediate layer in gradients and layering techniques on collector figures
- Cosplay and SFX applications for prop pieces, armour, and sculptural make-up
How to use it
- Surface preparation: Make sure the piece is clean, free of dust and grease. Apply a suitable primer beforehand to improve adhesion, especially on plastic or metal.
- Shaking: Shake the bottle well for 30–60 seconds before opening to homogenise the pigment with the acrylic binder.
- Thinning: For brush use, apply directly or thin slightly with distilled water or acrylic thinner (10–20%). For airbrush, adjust the thinning until you achieve a milk-like consistency, typically between 20 and 40% thinner.
- Application: Apply in thin, even coats. With a brush, work in a consistent direction to avoid brush marks. With an airbrush, maintain a pressure of 15–20 PSI and a distance of 10–15 cm from the piece.
- Drying: Touch-dry occurs within 15–30 minutes at room temperature. Wait at least 1 hour before applying a second coat or performing shading and washing techniques.
- Cleaning: Clean the brush or airbrush with warm water immediately after use. If the paint has dried in the airbrush, use a dedicated acrylic cleaner.
Usage tips
Use the shade to create natural transitions
Blue-Green works excellently as a transition colour in gradients between pure blues and greens. Mix small amounts with other colours from the Standard range to obtain coherent shadows and highlights without losing the temperature of the base tone.
Layering and zenithal on miniatures
If you work with wargame miniatures, use Blue-Green as a mid-layer in a zenithal scheme: first apply a dark base coat, illuminate from above with Blue-Green, and finish the most exposed areas with a lighter shade from the same family. The result is very convincing volume with minimal effort.
Controlling the final finish
The finish of this paint can vary between satin and matte depending on the number of coats and thinning ratio. If you need a completely matte finish for dust or pigment techniques, apply a matte varnish in aerosol once the base coat is finished. For wet or metallic effects, a satin or gloss varnish will add greater depth to the colour.
Frequently asked questions
Is it necessary to thin this paint before using it?
It is not mandatory, but it is recommended. Blue-Green (AK11169) has good out-of-the-bottle flow for brush use, although a light thinning with distilled water (10–20%) improves application and prevents brush marks from showing. For airbrush use, thinning is essential to avoid clogging.
Can it be used directly on plastic without a primer?
Technically yes, but it is not ideal. Without primer, the paint may peel off with handling of the piece. It is always recommended to apply a coat of primer compatible with acrylics to ensure long-term adhesion, especially on plastic, resin, or metal.
How long does it take to dry completely?
Blue-Green is touch-dry within 15–30 minutes at room temperature (20–25 °C). To work over it with washes, filters, or new coats, it is advisable to wait at least one hour. Full curing, which hardens the paint film, occurs after 24 hours.
Is it compatible with varnishes and effect products?
Yes. The Standard range by AK Interactive is compatible with the brand's own varnishes, washes, filters, and effect products. You can apply aerosol or brush-on varnishes over well-dried coats of Blue-Green without any risk of lifting the paint.
Can I mix it with other paints from the range?
Yes, all paints in the Standard range by AK Interactive are miscible with each other as they share the same water-based acrylic formula. You can mix Blue-Green with any other shade from the range to obtain custom colours without losing the paint's properties.
Where can I buy this paint in Spain?
Blue-Green (AK11169) is available at Feroca, official distributor of AK Interactive in Spain. You can purchase it directly from the Feroca online store with shipping throughout Spain and Europe.
No reviews
Tap to zoom
