Shopping Cart
```html
```
Dark Blue-Grey is an acrylic paint from the Standard range by AK Interactive, formulated with high pigmentation and a water-based formula to deliver solid, even coverage in a single coat. Its dark blue-grey tone makes it a versatile reference for military vehicles, spaceships, uniforms, and weathered metallic surfaces. Available at Feroca, official distributor of AK Interactive in Spain.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11164 |
| Colour name | Dark Blue-Grey |
| Range | Standard |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Application | Brush and airbrush |
| Finish | Satin / Matte depending on thinning and coats |
| Cleaning | Water and soap (uncured) / acrylic thinner (cured) |
What it is used for
Dark Blue-Grey fits into multiple modelling and artistic painting disciplines. Its colour value places it in the dark end of the blue-grey spectrum, making it ideal as a shading base or base colour on large surfaces.
- Hull and armour of World War II and modern conflict vehicles (naval fleet, armoured vehicles)
- Aircraft fuselages in Nordic or oceanic camouflage schemes
- Spaceships, armour, and equipment on science fiction and wargame miniatures
- Dark uniforms and tactical equipment pieces on scale figures
- Bases and dioramas featuring aged concrete or wet stone surfaces
- Cosplay pieces and SFX as a base for weathered metallic effects or factory-painted surfaces
How to use it
- Surface preparation: apply a suitable primer (dark grey or black) over the clean, dry piece. This improves adhesion and enhances the depth of Dark Blue-Grey.
- Thinning: the paint is ready to use straight from the bottle for brush application with little or no thinning. For airbrush, add between 10% and 20% water or acrylic thinner until you reach the desired consistency.
- Application: apply in thin, even coats. One or two coats are enough for solid coverage. Allow drying time between coats (5–10 minutes at room temperature).
- Drying: touch-dry time is approximately 15–20 minutes. For a full cure, wait at least 24 hours before applying washes, filters, or varnishes.
- Cleaning: clean your brush or airbrush with water before the paint cures. If it has already cured, use a specific acrylic thinner.
Tips and tricks
Integration into camouflage schemes
Dark Blue-Grey works very well as the base colour for shadow areas within two- or three-colour schemes. Combine it with lighter greys on highlighted areas to create natural transitions without the need for complex blending.
Base for weathering effects
Being a dark, neutral tone, it is an excellent base for subsequently applying paint chips, rust effects, and pigments. Allow the paint to cure fully before working on top with wet techniques such as washes or streaking.
Controlling the final finish
The finish of this paint can vary slightly depending on thinning and the number of coats applied. If you need a perfectly matte finish to apply powders or pigments, seal with a matte varnish once the final colour coat has dried.
Frequently asked questions
Can it be used directly without priming?
Technically yes, but it is not recommended. Primer improves the adhesion of Dark Blue-Grey on plastic, resin, or metal and prevents the colour from chipping during handling. For best results, always apply a primer first.
Is it compatible with an airbrush?
Yes. Dark Blue-Grey from the Standard range by AK Interactive is formulated for both brush and airbrush application. For airbrush use, thin between 10% and 20% with distilled water or acrylic thinner and work at a pressure of between 15 and 20 PSI for a smooth, even finish.
How long should you wait between coats?
With thin coats, 5 to 10 minutes at room temperature are enough before applying the next coat. For wet-on-wet techniques, you can work while the previous coat is still fresh. If you are going to apply washes or varnishes, wait at least 24 hours for a full cure.
How do you clean your tools after use?
If the paint is still fresh, plain water and soap are enough to clean brushes and airbrushes. If it has already cured, use a specific acrylic thinner. Always clean your airbrush immediately after use to avoid blockages.
Where can I buy this paint?
Dark Blue-Grey (AK11164) is available at Feroca, official distributor of AK Interactive in Spain. You can purchase it directly from the Feroca online store with shipping across Spain and Europe.
Is it suitable for painting wargame miniatures?
Yes. Dark Blue-Grey is perfectly suited for wargame miniatures. Its high pigmentation provides efficient coverage on small, detailed surfaces, and the 17 ml format is enough to paint a considerable number of figures from a single pot.
No reviews
Tap to zoom
