Shopping Cart
```html
```
Frog Green (AK11136) is an acrylic paint from the Standard range by AK Interactive, formulated with high pigmentation and a water-based formula to deliver uniform coverage and a clean colour in a single coat. Available in a 17 ml bottle, it is a versatile reference that works with both brush and airbrush, designed for modellers seeking precision and consistency in their projects. At Feroca, official distributor of AK Interactive in Spain, you can find it alongside the entire Standard range.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11136 |
| Colour | Frog Green |
| Range | Standard |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Finish | Satin / Matte (depending on application) |
| Application | Brush and airbrush |
| Cleaning | Water and soap (tools while wet) |
What it is used for
Frog Green is a saturated, highly readable green, ideal for representing natural surfaces, military equipment in deep green tones, fantasy creatures or dense vegetation elements. Its versatility makes it a reference colour for multiple disciplines:
- Painting military vehicles with dark green or jungle camouflage schemes
- Wargame miniatures: amphibious creatures, orcs, trolls or other fantasy figures with greenish skin
- Dioramas featuring vegetation, moss, lichen or swampy terrain
- Scale models of aircraft or vehicles with deep green liveries
- Cosplay details or hand-painted prop pieces
- SFX effects on surfaces requiring a vivid, opaque green
How to use it
- Surface preparation: apply a suitable primer to the piece beforehand. For plastic or resin surfaces, a grey or black primer ensures optimal adhesion of the Frog Green.
- Shaking the bottle: shake the bottle thoroughly for at least 30 seconds before opening. The high pigmentation of the Standard range requires a homogeneous mix of pigment and acrylic vehicle.
- Thinning: for brush application, you can use it straight from the bottle or add one or two drops of distilled water to improve flow. For airbrush, thin 20–30% with distilled water or AK Interactive acrylic thinner.
- Application: apply in thin, even coats. Allow to dry between coats (10–15 minutes at room temperature) before applying the next one. Two coats are usually sufficient for full coverage.
- Final drying: the paint is touch-dry in 15–20 minutes; full cure takes 24 hours. Avoid handling the piece before full cure if you plan to apply washes or varnishes on top.
- Cleaning: clean brushes and airbrush with water and soap immediately after use, before the paint dries.
Tips and tricks
Thin coats for better colour control
The high pigmentation of Frog Green can cause texture build-up if too much is applied at once. Always work in thin, progressive coats: you will have better control over saturation and the final finish will be cleaner, especially on highly detailed relief miniatures.
Mixing for highlights and shadows on figures
Frog Green works very well as a base colour for highlight areas on figures with greenish or organic skin. For highlights, mix it with a pale yellow from the Standard range. For shadows, combine it with a dark green or earth brown. This way you achieve a natural gradient without losing the colour's chromatic identity.
Final protection with varnish
If the project is going to be handled frequently, such as wargame miniatures or cosplay props, apply a coat of AK Interactive water-based matte or satin varnish once the colour is dry. This protects the paint and unifies the overall finish.
Frequently asked questions
Does this paint need to be thinned before use?
For brush application, Frog Green can be applied straight from the bottle or with a small amount of distilled water to improve flow. For airbrush, it is recommended to thin 20–30% with distilled water or AK Interactive acrylic thinner to achieve correct atomisation without clogging the needle.
Is it suitable for use with an airbrush?
Yes. The Standard range by AK Interactive, to which Frog Green (AK11136) belongs, is formulated to work with both brush and airbrush. When properly thinned, you get uniform coverage with no needle marks.
How long does it take to dry?
Frog Green is touch-dry in approximately 15–20 minutes at room temperature. For a full cure that allows washes, effects or varnishes to be applied on top, it is recommended to wait at least 24 hours.
Can it be used on resin and metal?
Yes, as long as the surface is properly primed. On resin and metal, apply a specific primer first to ensure adhesion. Frog Green, like the entire AK Interactive Standard range, adheres well over primer once it is dry.
Is it safe to use indoors?
Yes. Being a water-based acrylic paint, Frog Green contains no harsh solvents and does not generate harmful fumes under normal conditions of use. It is nevertheless recommended to work in a well-ventilated space.
Where can I buy this paint in Spain?
Frog Green AK11136 is available at Feroca, official distributor of AK Interactive in Spain. You can purchase it directly from the Feroca online store alongside the rest of the Standard range and all AK Interactive products.
No reviews
Tap to zoom
