Shopping Cart
```html
```
Saddle Brown (AK11104) is an acrylic paint from the Standard range by AK Interactive, formulated with high pigmentation and a water-based formula to deliver uniform and consistent coverage. Its saddle brown colour is a reference tone for any modeller: versatile, natural, and with a flawless finish whether applied by brush or airbrush.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11104 |
| Colour | Saddle Brown |
| Range | Standard |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Finish | Satin / Matte depending on application |
| Application | Brush and airbrush |
| Thinner | Water or acrylic thinner |
| Cleaning | Water and soap (while wet) |
What it is used for
Saddle Brown is one of those essential tones in any modeller's palette. Its earthy, warm character makes it a natural choice for representing leather, aged wood, packed earth, and organic surfaces with a realistic look. Some of its most common uses include:
- Painting straps, pouches, cartridge cases, and leather equipment on scale military figures
- Base coat or intermediate layer for wood finishes on ship, aircraft, and vehicle models
- Representation of dry earth and ground on dioramas and miniature bases
- Shading and transition layers on fantasy and wargame miniatures (Warhammer and similar)
- Weapon details, handles, and scabbards on historical miniatures
- Use in cosplay and SFX projects to simulate leather surfaces or worn natural materials
How to use it
- Surface preparation: Make sure the piece is clean, degreased, and primed. Shake the bottle well for at least 30 seconds before use.
- Thinning: For brush application, Saddle Brown can be applied directly or with a small amount of water to improve flow. For airbrush, add acrylic thinner until the desired consistency is achieved (typically between 20 and 40% dilution).
- Application: Apply in thin, successive coats, allowing each coat to dry before the next. This ensures even coverage and avoids brushstrokes.
- Drying: The paint is touch-dry within a few minutes at room temperature. For a full cure, it is recommended to wait at least 1 hour before applying washes, filters, or varnishes.
- Cleaning: Clean the brush or airbrush with water while the paint is still wet. If it has already dried, use acrylic thinner.
Usage tips
Thin coats for greater control
With Saddle Brown it is best to work in thin coats, especially when painting areas with fine detail such as buckles, stitching, or leather textures. Several light coats give better results than a single thick coat, which can obscure the detail of the miniature or model.
Starting point for weathering techniques
Saddle Brown works very well as a base before applying weathering techniques. Over this colour you can add dark brown washes to deepen shadows in recesses and relief areas, or lighten with warmer colours on worn and highlighted areas. It is also an excellent first step before applying earth pigments.
Combining with other colours from the Standard range
To create natural transitions, combine it with other tones from AK Interactive's Standard range. Mixes with lighter colours allow you to simulate sun-bleached leather, while the addition of darker tones adds depth to shadows in folds and seams.
Frequently asked questions
Do I need to prime the surface before applying the paint?
Yes, it is always recommended to apply a primer beforehand to ensure adhesion. Saddle Brown, like the rest of the paints in AK Interactive's Standard range, adheres much better to primed surfaces, which also improves the durability of the final finish.
Can I use this paint with an airbrush?
Yes. Saddle Brown can be used without any issues in an airbrush. Thin it with water or acrylic thinner until you achieve a fluid consistency, similar to skimmed milk. A pressure of between 15 and 20 PSI is usually suitable for base colour coats.
How long does it take to dry?
Saddle Brown is touch-dry within a few minutes under normal temperature and humidity conditions. For applying additional coats, washes, or varnishes, it is advisable to wait at least one hour to ensure proper curing.
What can I use to clean my tools after using it?
As it is a water-based acrylic paint, cleaning is straightforward: water and soap are sufficient while the paint is still wet. If it has started to dry on the brush or airbrush, use acrylic thinner for more effective cleaning.
Where can I buy this paint in the UK?
Saddle Brown (AK11104) is available at Feroca, the official AK Interactive distributor in Spain. You can purchase it directly from the Feroca online store with shipping available across Europe.
Is it suitable for beginners?
Yes. AK Interactive's Standard range is designed for all types of modellers, both beginners and advanced. Saddle Brown offers good coverage in just a few coats, is easy to thin, and mistakes can be corrected easily while the paint is still wet.
No reviews
Tap to zoom
