Shopping Cart
```html
```
Cadmium Red is an acrylic paint from the Standard range by AK Interactive, formulated with high pigmentation to deliver solid, even coverage in one or two coats. Available in a 17 ml pot, it is compatible with both brush and airbrush, and thins easily with water or specific acrylic thinners. Feroca is the official AK Interactive distributor in Spain, so you can buy it here with a guarantee of authentic product.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11085 |
| Colour name | Cadmium Red |
| Range | Standard |
| Type | Acrylic paint |
| Base | Water-based acrylic |
| Volume | 17 ml |
| Finish | Satin / Matt depending on application |
| Application | Brush and airbrush |
| Thinner | Water or acrylic thinner |
What it is used for
Cadmium Red is a saturated, versatile red that covers a wide range of uses in scale modelling and creative arts. Its vibrant tone makes it a go-to colour for any project that demands a clean, well-covered red.
- Scale model painting of civilian vehicles, traffic signs, military vehicle details or aircraft.
- Wargame miniatures: shields, cloaks, insignia, creature eyes or faction markers.
- Dioramas: decorative elements, autumn foliage, doors or urban signage.
- Historical and fantasy figures: uniforms, accessories and armour details.
- Cosplay: painting foam, resin or thermoplastic pieces.
- SFX effects and props: wounds, fluids or intensely coloured surfaces on various materials.
How to use it
- Surface preparation: Clean and degrease the piece. Apply a suitable primer if the surface is plastic, resin or metal. This improves adhesion and colour fidelity of Cadmium Red.
- Shaking the pot: Shake well before opening to homogenise the pigment. If the pot has a mixing ball, shake for at least 30 seconds.
- Thinning: For brush use, apply straight from the pot or with a few drops of water. For airbrush, thin between 10 and 30% depending on the pressure and needle type you are using.
- Application: Apply in thin, progressive coats. Allow to dry between coats. One or two coats are usually enough for full coverage.
- Drying: Touch-dry within a few minutes; fully cured in approximately 24 hours depending on coat thickness and ambient temperature.
- Cleaning: Clean the brush or airbrush with water while the paint is still wet. Once dry, you will need a specific acrylic solvent.
Usage tips
Getting the most out of it on miniatures
To achieve depth on miniatures, apply Cadmium Red as a base colour and then add dark washes in the recessed areas. Work up the highlights by mixing in a lighter tone or adding a touch of white. The natural satin finish of this range makes it easy to apply varnishes and filters afterwards.
Airbrush tips
Cadmium Red is a highly pigmented colour, so it is advisable to start with a 20% dilution and adjust according to the result. Work at moderate pressures (15–20 psi) and in short passes to avoid pooling. If you need to create colour transitions on bodywork or large surfaces, a more generous dilution will give you a smoother gradient.
Compatibility with varnishes and effects
Once dry, Cadmium Red accepts satin or matt varnishes from the AK Interactive range without any issues. If you are going to apply washes over it, first use a satin varnish so the wash flows correctly and does not stain areas you want to keep clean. For weathering effects, it is compatible with chipping techniques and pigments from the same brand.
Frequently asked questions
Is priming necessary before applying this paint?
It is not mandatory, but it is highly recommended. On plastic, resin or metal, a suitable primer improves the adhesion of Cadmium Red and prevents the paint from chipping with handling. On porous surfaces such as foam, primer also seals the material and reduces paint consumption.
Can it be used with an airbrush without any problems?
Yes. Cadmium Red is formulated to be compatible with both brush and airbrush. Thin between 10 and 30% with water or AK Interactive acrylic thinner and work at moderate pressures. For fine needles (0.2 mm), increase the dilution slightly to avoid clogging.
How long does it take to dry?
To the touch, Cadmium Red dries within a few minutes under normal temperature and humidity conditions. To apply a second coat or a varnish, wait at least 15–20 minutes. Full cure takes approximately 24 hours, depending on the thickness of the coats applied.
Is it compatible with other paints and finishing products?
Yes. Being a water-based acrylic paint, Cadmium Red is compatible with the rest of the AK Interactive Standard range, as well as its varnishes, washes, filters and pigments. Avoid mixing it directly with solvent-based products while it is still wet.
Where can I buy this paint with a guarantee of original product?
Feroca is the official AK Interactive distributor in Spain, so purchasing Cadmium Red (AK11085) here guarantees you receive an authentic product with the original formulation and in perfect condition.
What should I do if the paint has thickened inside the pot?
If Cadmium Red has increased in viscosity over time, add a few drops of distilled water or AK Interactive acrylic thinner and shake the pot well. Avoid adding too much liquid at once so as not to lose pigmentation. If the pot has been open for a long time, the paint may have started to polymerise and might not recover its original consistency.
No reviews
Tap to zoom
