Shopping Cart
```html
```
Golden Yellow (AK11041) is an acrylic paint from the AK Interactive Standard range, formulated with high pigmentation to deliver consistent coverage from the first coat. Its water-based formula makes cleaning and mixing with other colours in the same range easy, and its satin finish makes it a versatile option for all kinds of scale modelling and miniature painting projects.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11041 |
| Range | Standard |
| Colour | Golden Yellow |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Finish | Satin |
| Application | Brush and airbrush |
| Cleaning | Water and soap (tools while still wet) |
What it is used for
Golden Yellow is one of the most sought-after yellows in scale modelling thanks to its warmth and luminosity. It is used across a wide range of projects, from military vehicles to fantasy figures:
- Base coat and colour layers on scale models of military vehicles, trucks, construction machinery or training aircraft with yellow schemes.
- Lighting and zenithal highlighting on wargame miniatures: apply Golden Yellow as a light colour over raised areas of figures with a darker base tone.
- Details on weapons, jewellery, gold ornaments and decorative elements on fantasy or science fiction miniatures.
- Base colour for blends and gradients towards oranges, olive greens or earthy browns in dioramas and scenery.
- Cosplay and props: detail painting and finishing on foam or 3D-printed plastic pieces.
- Weathering effects such as aged or chipped paint (chipping) on surfaces simulating industrial machinery.
How to use it
- Prepare the surface: apply a suitable primer before painting. For dark basecoats under Golden Yellow, use a white or light grey primer to preserve the brightness of the yellow.
- Shake the bottle well: close the cap and shake for at least 30 seconds to fully homogenise the pigment.
- Thin if necessary: for brush application, the paint is usually ready to use straight from the bottle or with minimal thinning with water. For airbrush, thin 20–30% with distilled water or AK Interactive's specific thinner until the right consistency is reached.
- Apply in thin coats: it is preferable to apply two or three light coats rather than one thick coat. Allow 15 to 30 minutes of drying time between coats.
- Touch-dry time: approximately 15–20 minutes under normal temperature and humidity conditions.
- Cleaning: clean brushes and airbrush with water and soap immediately after use, before the paint dries completely.
Usage tips
How to achieve good coverage with yellows
Yellows have historically been the most difficult colours to cover. To get a smooth base with Golden Yellow, first apply a white primer coat or a light yellow base coat. This will reduce the number of coats needed and prevent the dark base colour from showing through.
Colour mixing and transitions
Golden Yellow mixes perfectly with other colours in the AK Interactive Standard range. Add white for highlights and brighter areas, or mix with oranges and earth tones for warm shadows. For smooth gradients with an airbrush, work at low pressures (12–15 PSI) with continuous movements.
Storage and preservation
Store the bottle upright, with the cap tightly closed and away from heat sources or direct light. If the paint thickens over time, add a few drops of distilled water, shake well and check the consistency before use. Proper maintenance considerably extends the product's shelf life.
Frequently asked questions
Can I use this paint directly in an airbrush without thinning?
Paints from the AK Interactive Standard range, including Golden Yellow, typically require thinning of 20–30% with distilled water or a specific airbrush thinner. Using it unthinned may clog the needle or result in an uneven, textured finish. Always test the consistency on paper before applying to the piece.
How many coats do I need for full coverage?
Yellows in general require more coats than other colours. With Golden Yellow, over a white primer two or three thin coats are usually sufficient. Over dark backgrounds you may need an extra coat or two. The key is not to overload each coat: it is better to add more coats than to try to cover in one thick pass.
Is it compatible with varnishes and washes?
Yes. Once properly dry and cured, Golden Yellow accepts finishing varnishes (matt, satin or gloss) and washes from the AK Interactive range. It is recommended to apply a gloss varnish coat before washes to protect the base paint and make it easier to remove the excess.
Can I mix this paint with other colours in the same range?
Absolutely. All colours in the AK Interactive Standard range are miscible with each other as they share a water-based acrylic formula. You can mix Golden Yellow with any other colour in the range to create custom transitions, highlights or shadows.
Where can I buy this paint in Spain?
Feroca is the official distributor of AK Interactive in Spain. You can purchase Golden Yellow (AK11041) directly from the Feroca online store, where you will find the complete Standard range and all other AK Interactive products, with stock availability and nationwide shipping.
Is this paint suitable for brush painting as well as airbrushing?
Golden Yellow is formulated for both applications. With a brush, apply it straight from the bottle or with minimal thinning with water. With an airbrush, thin 20–30% for uniform atomisation. Its high pigmentation guarantees good results with both methods.
No reviews
Tap to zoom
