Shopping Cart
```html
```
Pale Yellow is an acrylic paint from the Standard range by AK Interactive, formulated with high pigmentation to deliver uniform coverage in one or two coats. Water-based, it is compatible with both brush and airbrush, and integrates seamlessly into any scale modelling or miniature painting workflow. Available at Feroca, official distributor of AK Interactive in Spain.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11038 |
| Range | Standard |
| Colour | Pale Yellow |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Finish | Satin / Matt depending on colour |
| Application | Brush and airbrush |
What it is used for
Pale Yellow is a versatile shade covering a wide spectrum of uses in scale modelling, wargames and special effects. Its pale, desaturated hue makes it an ideal base colour, but also a go-to resource for highlights, transitions and specific detail work.
- Base coat and intermediate layers on military vehicle and aircraft scale models
- Zenithal highlighting and weathering effects on wargame miniatures
- Fair skin tones, uniforms and equipment on historical figures
- Dioramas: dry vegetation, light sand, desert terrain textures
- Painting accessories and armour on fantasy and science fiction miniatures
- Aged or faded paint effects on cosplay and SFX projects
How to use it
- Surface preparation: apply a suitable primer to the piece. For very smooth surfaces, a spray primer ensures better adhesion.
- Shaking: shake the bottle thoroughly for at least 30 seconds before use. The dense pigmentation of the Standard range tends to settle.
- Thinning: for brush application, you can use the paint straight from the bottle or thin it slightly with water or acrylic thinner (10–20 %). For airbrush, adjust the consistency to your equipment, typically between 20 and 40 %.
- Application: apply in thin, even coats. Pale Yellow covers well, but thin layers give you greater control over transitions and volumes.
- Drying: touch-dry time is approximately 15–20 minutes under normal conditions. Wait for full drying before applying subsequent coats or varnishes.
- Cleaning: clean brushes and airbrush with warm water or acrylic thinner immediately after use.
Usage tips
For highlights and NMM
Pale Yellow is highly useful as a light tone in Non-Metallic Metal (NMM) techniques or for the brightest highlight points on warm-coloured uniforms. Mix small amounts with the base colour to create gradual, natural transitions without the result looking too cold or greyish.
With airbrush for weathering effects
Thinned to 30–40 %, Pale Yellow works very well in soft passes from the zenithal angle to simulate sun-bleaching on vehicles or uniforms. Work at low pressures (10–15 psi) and keep your distance for a progressive fade.
Compatibility with the rest of the range
As part of the AK Interactive Standard range, Pale Yellow is fully miscible with all other colours in the same line. You can mix directly on the palette without any separation or uneven drying time issues. It is also compatible with AK Interactive varnishes and acrylic mediums.
Frequently asked questions
Do I need to thin the paint before using it with an airbrush?
Yes. The AK Interactive Standard range has a high pigmentation that is somewhat thick for airbrushing straight from the bottle. For Pale Yellow (AK11038), a thinning ratio of between 20 and 40 % with distilled water or a specific acrylic thinner is recommended, adjusting according to the pressure and needle of your equipment.
How many coats do I need for good coverage?
In most cases, two thin coats are sufficient for complete coverage. Very light shades like Pale Yellow may require a primer coat in a similar colour (white or cream) to maximise coverage and saturation of the final colour.
Can I mix this paint with other colours from the same range?
Yes, all colours in the AK Interactive Standard range are miscible with one another. Pale Yellow mixes without any issues with other shades in the line directly on the palette, without affecting drying time or adhesion.
Which varnish is most suitable for protecting the finish?
It depends on the final finish you are looking for. AK Interactive offers specific varnishes in matt, satin and gloss finishes compatible with Pale Yellow. If you are going to apply washes or filters over the piece, an intermediate satin varnish is the usual choice before continuing with shading techniques.
Is this paint suitable for use over spray primer?
Yes. Pale Yellow adheres correctly over water-based and solvent-based primers, both in spray and brush-applied form. For the best result with a light shade like this, priming with a white or cream tone is recommended.
Where can I buy this paint in Spain?
Pale Yellow (AK11038) is available at Feroca, official distributor of AK Interactive in Spain. You can purchase it directly from the Feroca online store or at specialist retailers that carry the brand.
No reviews
Tap to zoom
