Shopping Cart
```html
```
Medium Sand is an acrylic paint from the Standard range by AK Interactive, formulated with high pigmentation and a water-based formula to provide uniform coverage in one or two coats. Its medium sand tone is one of the most sought-after colours in military modelling, ideal for faithfully reproducing vehicles and equipment from desert or arid theatres. Available at Feroca, official AK Interactive distributor in Spain.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11034 |
| Range | Standard |
| Colour | Medium Sand |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Finish | Satin / Matte depending on thinning and coats |
| Application | Brush and airbrush |
| Cleaning | Water and soap (tools while wet) |
What it is used for
Medium Sand is an essential staple in any modelling palette. Its versatility makes it a constantly used reference, both as a base colour and for blending and transitions.
- Base colour for military vehicles in desert theatres (tanks, half-tracks, field trucks).
- Representation of infantry uniforms and equipment in arid and semi-arid climates.
- Highlighting and colour modulation of ochre or earth tones in dioramas and wargame miniatures.
- Backgrounds and scenery elements in desert or dry earth settings.
- Transition colour in blends with whites, ochres and browns for dust and weathering effects.
- Applications in cosplay and SFX to simulate sand, earth or aged surfaces on foam, resin or plastic pieces.
How to use it
- Surface preparation: make sure the piece is clean, dry and properly primed. For plastic or resin, a grey or sand primer improves adhesion and the saturation of the Medium Sand tone.
- Shaking: shake the bottle well for 30–60 seconds before opening. The inner ball helps homogenise the pigment.
- Thinning: for brush application, use it straight from the bottle or with a drop of water or acrylic medium to improve flow. For airbrush, thin 20–30% with distilled water or acrylic thinner until you reach the desired consistency.
- Application: apply in thin, even coats. Allow to dry between coats (10–15 minutes at room temperature). Two coats are usually sufficient for full coverage.
- Drying: touch-dry time is fast (15–20 minutes). Full cure occurs in 24 hours, the recommended point at which to apply washes, filters or varnishes.
- Cleaning: clean brushes and airbrush with water and soap immediately after use. If the paint has dried, use a specific acrylic cleaner.
Usage tips
Blending and colour modulation
Medium Sand is an excellent starting point for creating a range of sand tones. Adding white gives you natural highlights for the highest light-impact areas. Mixing with ochres or earth browns produces cohesive shadows without losing the overall colour reading. Always work wet if you use the wet palette blending technique.
Integration into chipping and weathering schemes
This tone works very well as a second coat in chipping techniques applied over a darker base. It is also useful for simulating dry dust through drybrushing over surfaces previously shaded with brown or earth washes.
Airbrush use for pre-highlighting
To create sun-bleaching effects on vehicles or figures, thin Medium Sand to 30–40% and apply with an airbrush over the areas of greatest light exposure (upper and horizontal surfaces). The result is a more realistic and three-dimensional finish without the need for complex blends.
Frequently asked questions
Do I need to thin the paint before applying it with a brush?
Medium Sand can be applied straight from the bottle with a brush for coverage coats. If you want greater fluidity or are working on small surfaces with lots of detail, a small amount of water or acrylic medium improves flow without compromising pigmentation.
Can this paint be used with an airbrush?
Yes. The AK Interactive Standard range is formulated to be airbrush-compatible. Thin Medium Sand with distilled water or acrylic thinner until you achieve a milk-like consistency. Always test on paper before moving on to the piece.
How long should I wait between coats?
With Medium Sand, waiting 10–15 minutes between coats at normal room temperature (20–25 °C) is sufficient. If you are going to apply a wash or varnish on top, wait at least 24 hours to ensure full cure.
Is it compatible with acrylic washes and filters?
Yes, as long as you apply an intermediate protective varnish before the wash. This prevents the wash from lifting or staining the base colour layer. AK Interactive offers specific satin and matte varnishes for this step.
How do I clean my tools after using this paint?
As it is a water-based acrylic paint, cleaning while wet is straightforward with water and soap. If the paint has started to dry in the airbrush or on the brush, use a specific acrylic cleaner to dissolve the residue without damaging the tools.
Where can I buy this paint in Spain?
Medium Sand (AK11034) is available at Feroca, official AK Interactive distributor in Spain. You can purchase it directly from the Feroca online store with shipping throughout mainland Spain and the Balearic Islands.
No reviews
Tap to zoom
