Shopping Cart
```html
```
Pale Grey is an acrylic paint from the AK Interactive Standard range, formulated with high pigmentation and a water-based formula to deliver uniform and consistent coverage. Available in a 17 ml bottle, it is an essential reference for modellers looking for a versatile light grey, suitable for both brush and airbrush. Feroca, official distributor of AK Interactive in Spain, has it available as part of the complete Standard range catalogue.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11013 |
| Range | Standard |
| Colour | Pale Grey |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Finish | Satin / Matte (depending on application) |
| Application | Brush and airbrush |
What it is used for
Pale Grey is one of those background colours that ends up being key in any palette. Its light grey tone makes it a go-to resource across multiple modelling and creative painting disciplines:
- Base coat or intermediate layer on military vehicles, aircraft and scale warships
- Lighting and zenithal highlighting on wargame miniatures and figures
- Painting concrete, stone, asphalt or aged metal surfaces in dioramas
- Clothing, equipment and armour colour on fantasy and science fiction miniatures
- Transitions and blends in gradients on cosplay figures or SFX elements
- Lightening other acrylic paints to create tonal variants without losing chromatic cohesion
How to use it
- Preparation: Shake the bottle well for at least 30 seconds before opening it. The paint can settle over time and it is important that the pigment is fully integrated.
- Thinning: For brush use, apply directly or with a few drops of water or acrylic medium if you want greater flow. For airbrush, thin by 20–30% with water or a specific acrylic thinner until you achieve a skimmed-milk consistency.
- Application: Apply in thin, successive coats. Pale Grey covers well, but multiple thin layers give a more uniform and controlled finish than a single thick coat.
- Drying: Touch-dry in 10–15 minutes under normal conditions. Wait at least 30 minutes before applying a new coat or varnish.
- Cleaning: Clean the brush or airbrush with water while the paint is still fresh. If it has already dried, use isopropyl alcohol or a specific airbrush cleaner.
Usage tips
For zenithal and volumetric work on miniatures
Pale Grey works very well as a zenithal lighting colour over dark primers. Apply it with an airbrush from above at a 45–90 degree angle to define volumes before starting with the final colours. It is a quick technique that adds a great deal of depth right from the start.
Blends and transitions
Being a neutral light grey, Pale Grey mixes without conflict with almost any colour in the Standard range. Use it to lighten tones without resorting to pure white, as the result is more natural and less aggressive on the highlight points of figures and vehicles.
Surfaces and textures in dioramas
To simulate concrete, stone or whitewashed walls in dioramas and miniature bases, apply Pale Grey as a base coat and work over it with dark washes and pigments. The light tone of the colour helps washes settle well and makes the final texture look convincing.
Frequently asked questions
Do I need to thin this paint to use it with an airbrush?
Yes, for airbrush use it is recommended to thin Pale Grey by 20 to 30% with distilled water or a specific acrylic thinner. The right consistency is similar to skimmed milk: fluid but with some body. Straight from the bottle it is usually too thick for a standard needle pass.
How many coats do I need for good coverage?
With Pale Grey, two thin coats are usually enough over a light primer. Over very dark backgrounds it may need three coats. It is always better to apply several thin layers than a single thick one, as this avoids lumps and preserves the detail of the piece.
Can I mix it with other paints from the same range?
Yes, all paints in the AK Interactive Standard range are compatible with each other. Pale Grey mixes without any issues with the rest of the colours in the range to create smooth transitions or custom tones.
Is it necessary to apply a varnish afterwards?
It is not mandatory, but it is highly recommended if the piece is going to be handled frequently or if you are going to apply washes and filters on top. A satin or matte varnish protects the paint and helps subsequent effects settle evenly.
How long does it take to dry completely?
Pale Grey is touch-dry in about 10–15 minutes under normal temperature and humidity conditions. For full adhesion that can withstand washes or additional coats, it is ideal to wait at least 30 minutes between coats.
Where can I buy this paint in Spain?
AK11013 Pale Grey is available at Feroca, official distributor of AK Interactive in Spain. You can purchase it directly from the Feroca online store along with the rest of the Standard range catalogue.
No reviews
Tap to zoom
