Shopping Cart
```html
```
The Playmarker Yellow (AKM016) is a water-based acrylic paint marker by AK Interactive designed for modellers and wargamers looking for speed, precision and clean results. Its highly pigmented acrylic formula offers excellent coverage and adhesion on plastic, resin, metal and wood, with a satin finish characteristic of the colour Yellow. Available at Feroca, official distributor of AK Interactive in Spain.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AKM016 |
| Colour | Yellow |
| Product type | Acrylic paint marker |
| Base | Water-based acrylic |
| Volume | ~5 ml |
| Tip | Brush-type felt tip |
| Finish | Satin |
| Drying | Fast |
| Compatible surfaces | Plastic, resin, metal, wood |
| Resistance | To handling, water and heat |
What it is used for
The Playmarker Yellow is designed to apply colour quickly, cleanly and in a controlled manner across a wide variety of creative and modelling projects:
- Painting wargame miniatures: ideal for bases, uniforms, equipment and yellow details on plastic or resin figures.
- Scale models: markings, hazard signs, military vehicle panels, aircraft and civilian vehicles requiring precise yellow.
- Dioramas: dry vegetation, scene lighting, ambient light effects or urban signage.
- Quick sketches and colour tests on any compatible surface before committing to a final piece.
- Cosplay and SFX: details on armour, props and set pieces that need a touch of durable, handling-resistant colour.
- Touch-ups and corrections on specific areas without needing to reach for an airbrush or prepare a palette.
How to use it
- Prepare the surface: clean the piece of dust, grease or mould release residue. For best results with the colour Yellow, apply a white spray primer before painting; it noticeably improves coverage and colour saturation.
- Activate the marker: shake the Playmarker well with the cap on for a few seconds. Press the tip against a test surface (paper or palette) until the paint flows evenly through the felt tip.
- Apply the paint: paint with smooth, controlled strokes directly onto the piece. The brush-type tip allows you to work on both broad areas and fine details. You can apply several coats to increase coverage, letting each coat dry before applying the next.
- Blend and feather: while the paint is still wet, you can blend and create transitions with a slightly damp brush to achieve shading or gradient effects.
- Apply weathering effects if needed: once dry, the paint holds up perfectly to subsequent work with weathering products, washes or pigments without any risk of lifting.
- Varnish if desired: you can apply any type of varnish (matt, satin or gloss) over the Yellow without any risk of damaging the paint layer.
- Cleaning: clean the tip with a damp cloth immediately after use. Store the marker with the cap firmly closed to prevent it from drying out.
Usage tips
White primer for Yellow
Yellow is naturally one of the colours with the least covering power. Using a white primer before applying the Playmarker Yellow is especially important for this reference: you will achieve a brighter, more saturated colour with fewer coats. If you start from grey or black plastic, the result will look dull even after several layers.
Thin coats for greater control
Apply the colour in thin, even coats rather than loading the tip heavily in a single pass. The fast drying time of the acrylic formula allows you to build up coats without long waiting times. This avoids build-up in corners and raised details, and gives you a much more uniform finish.
Frequently asked questions
Is it resistant once dry?
Yes. The acrylic formula of the Playmarker Yellow is resistant to handling, water and heat once it has cured correctly. It holds up perfectly to subsequent work with weathering products and can be varnished with any type of finish.
Can it be applied on any surface?
The Playmarker Yellow adheres well to plastic, resin, metal and wood. For very smooth or non-porous surfaces, it is recommended to apply a primer beforehand to ensure maximum adhesion and durability of the paint.
Is the finish matt or satin?
The finish of the Playmarker Yellow is satin, which may vary slightly depending on the nature of the colour's pigments. If you prefer a matt or gloss finish, you can apply the appropriate varnish over the dry paint without any problem.
Can I mix this colour with other Playmarkers?
Yes. Since they are all based on the same water-based acrylic formula, Playmarkers are compatible with one another. You can mix colours directly on the palette or blend on the piece while the paint is still wet to achieve transitions and colour blends.
Where can I buy the Playmarker Yellow in Spain?
The Playmarker Yellow (AKM016) is available at Feroca, official distributor of AK Interactive in Spain. You can purchase it directly from the Feroca online store, where you will find the full range of Playmarkers and the rest of the AK Interactive product catalogue.
No reviews
Tap to zoom
