Shopping Cart
```html
```
The Gloss Varnish Spray AK1012 is a gloss finish varnish in a 400 ml aerosol format designed to protect and apply a uniform layer of shine over scale models, miniatures and dioramas. Its high-quality formula guarantees an intense gloss finish without yellowing over time, with superior adhesion and resistance. Available at Feroca, official distributor of AK Interactive in Spain.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK1012 |
| Type | Aerosol / Spray |
| Content | 400 ml |
| Finish | Gloss |
| Included nozzles | Standard nozzle + fine nozzle |
| Chromatic stability | Non-yellowing |
| Resistance | Ultra resistant |
| Application distance | Approx. 25 cm |
What it's used for
This spray varnish is designed to apply a gloss protective coat over any painted surface, preparing it for subsequent techniques or as a final finish. It is an essential tool in the workflow of any modeller or artist looking for professional results.
- Gloss protective coat over scale military vehicles, aircraft and ship models
- Base layer before applying decals, as the smooth finish prevents the silvering effect
- Intermediate layer between painting techniques: between base coats, shading and washes
- Gloss final finish on wargame miniatures (excellent for metallic armour pieces or enamels)
- Sealing and protection of complete figures and dioramas
- High-gloss finishes on cosplay pieces and SFX accessories
- Protection of resin work or painted 3D prints
How to use it
- Preparation: Shake the can vigorously for at least one minute to obtain a homogeneous mixture before each use.
- Position: Keep the spray in an upright position during application.
- Application: Apply thin, quick coats at a distance of approximately 25 cm from the surface. It is better to apply several light coats than a single thick one.
- Drying between coats: Allow at least 5 minutes of drying time between each coat before applying the next.
- Nozzle cleaning: When finished, turn the can upside down and hold the nozzle down for a few seconds until no more product comes out. This prevents the nozzle from clogging and extends the spray's useful life.
Usage tips
Temperature and humidity
Apply the varnish in moderate temperature conditions (between 15 and 25 °C) and with low relative humidity. In very humid environments or extreme cold, the varnish may lose transparency or develop a whitish effect. Always work in well-ventilated spaces.
The fine nozzle for greater control
The can includes two nozzles: the standard one for large surfaces and the fine one for hard-to-reach areas or small pieces. Switch to the fine nozzle when working with detailed miniatures or when you need greater precision in application, thus avoiding product build-up in recesses.
Pre-coat before decals
If you are going to apply water slide decals to your model, applying a coat of this gloss varnish beforehand is essential. The smooth surface prevents air bubbles from being trapped under the decal, eliminating the unwanted silvering effect that ruins the final result.
Frequently asked questions
How long does it take to dry between coats?
With Gloss Varnish AK1012, a drying time of at least 5 minutes between coats is recommended. For complete and durable protection, it is ideal to let the final coat dry for several hours before handling the piece or applying other techniques on top.
Is it compatible with any type of base paint?
Yes. The AK1012 is compatible with water-based acrylic paints, such as the entire Standard and Intense range from AK Interactive, as well as with solvent-based paints once they are fully cured. Always make sure the underlying coat is completely dry before applying the varnish.
Can it be used as an intermediate layer before a matte or satin varnish?
Absolutely. It is common practice to first apply the Gloss Varnish AK1012 to place decals and apply washes, and then finish with a matte or satin varnish for the definitive finish depending on the desired effect.
Does it yellow over time?
No. The formula of Gloss Varnish AK1012 has been specifically developed to offer long-term chromatic stability, without yellowing or altering the colours of the underlying paint, making it ideal for work you want to preserve in perfect condition.
How do I prevent the nozzle from clogging?
When you finish using the AK1012, turn the can upside down and hold the nozzle down for a few seconds until no more product comes out. This purges the nozzle channel and prevents residual varnish from drying inside and blocking it. It is the most important step to keep the spray in good condition.
Where can I buy this varnish in Spain?
Gloss Varnish AK1012 is available at Feroca, official distributor of AK Interactive in Spain. You can purchase it directly from the Feroca online store with shipping throughout mainland Spain.
No reviews
Tap to zoom
