Shopping Cart
```html
```
Gun Metal is an acrylic paint from the AK Interactive Standard range, formulated with high pigmentation to achieve that characteristic dark, cold metallic tone of worked steel and raw metals. Water-based, it can be applied with both brush and airbrush, offering solid coverage from the first coat. Available at Feroca, official distributor of AK Interactive in Spain.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11212 |
| Range | Standard |
| Color | Gun Metal |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Finish | Satin |
| Application | Brush and airbrush |
What it is used for
Gun Metal is a reference color for representing dark metals, worn steel, and ferrous surfaces in all kinds of modelling and miniature painting projects. Its versatility makes it an essential addition to any palette:
- Military vehicle models: engines, tracks, chassis, and exposed mechanical parts
- Scale aircraft: turbines, propellers, landing gear, and metal panels
- Wargame miniatures: weapons, armor, chainmail, and character equipment
- Dioramas: pipes, industrial machinery, metal structures, and rusted surfaces prior to chipping
- Historical and fantasy figures: swords, shields, breastplates, and harnesses
- Cosplay and SFX: metallic finishes on foam, resin, or latex for props and set pieces
How to use it
- Surface preparation: apply a suitable primer to the piece. For dark metallics like Gun Metal, a black or dark grey primer enhances the depth of the final color.
- Shaking: shake the bottle well for at least 30 seconds before use. Metallic paints require proper shaking so that the particles remain in uniform suspension.
- Brush application: use a synthetic hair brush. Apply in thin coats and allow to dry between each one. Two coats are usually sufficient for optimal coverage.
- Airbrush application: thin with distilled water or AK Interactive acrylic thinner until you achieve a consistency similar to milk. Recommended pressure between 15 and 20 psi.
- Drying: touch dry in 15–20 minutes. To work on top with weathering effects or varnishes, wait at least 1 hour or apply gentle heat.
- Cleaning: clean brushes and airbrush with tap water immediately after use, or with AK Interactive acrylic thinner if the paint has started to dry.
Tips and advice
How to get the most out of the metallic finish
Gun Metal works especially well over dark backgrounds. If you are looking for a worn metal effect, apply a first base coat and then use a sponge to dab lighter touches on the worn areas. For a more vivid finish, apply a satin varnish on top before adding rust or weathering effects.
Integration into weathering techniques
This color is a perfect base for techniques such as chipping, dry brushing with lighter tones, and dark washes that simulate accumulated dirt. AK Interactive weathering products adhere perfectly to the dry film of this acrylic paint.
Mixing and modulation
Gun Metal can be mixed directly on the palette with other colors from the AK Interactive Standard range. Add a few drops of black to obtain darker areas on engines or recesses, or mix with warmer tones to simulate bronzed or aged metals. The high pigmentation of the Standard range ensures that the resulting color retains its strength without any loss of coverage.
Frequently asked questions
Do I need a primer before applying a metallic acrylic paint?
Yes, it is always recommended to prime the piece before applying Gun Metal or any paint from the AK Interactive Standard range. Primer improves adhesion, prevents the paint from flaking, and enhances the depth of the color — especially important with metallic tones like Gun Metal over dark primers.
Can I use this paint directly in an airbrush without thinning?
AK Interactive Standard range paints, including Gun Metal, are formulated for brush use but can be used in an airbrush if thinned beforehand with distilled water or AK Interactive's specific acrylic thinner. Without thinning, the viscosity may be too high and cause clogs in the airbrush.
How long does this acrylic paint take to fully dry?
Gun Metal is touch dry in approximately 15–20 minutes under normal temperature and humidity conditions. To apply additional coats or work on top with weathering products, it is advisable to wait at least 1 hour and make sure the underlying layer is completely cured.
Is this paint compatible with weathering products and varnishes?
Yes. Gun Metal, once dry, is fully compatible with AK Interactive weathering products: washes, pigments, chipping fluids, and rust effects. It is recommended to apply a coat of matte or satin varnish between the base paint and the weathering effects to protect the previous work and make it easier to clean up any excess.
How do I clean brushes and airbrush after using water-based acrylic paint?
Cleaning is straightforward thanks to the water-based formula of Gun Metal. While the paint is still fresh, tap water is all you need to clean brushes and airbrush. If the paint has started to dry in the airbrush, use AK Interactive acrylic thinner to dissolve the residue without damaging the equipment parts.
Where can I buy this paint in Spain?
Gun Metal AK11212 is available at Feroca, official distributor of AK Interactive in Spain. You can purchase it directly from the Feroca online store, where you will find the entire AK Interactive Standard range and all other products from the brand.
No reviews
Tap to zoom
