Shopping Cart
```html
```
Olive Green is an acrylic paint from the Standard range by AK Interactive, formulated with high pigmentation and a water-based formula to deliver solid coverage and a consistent finish. Available in a 17 ml dropper bottle, it is a versatile reference that works equally well with a brush or airbrush, covering everything from military vehicles to wargame miniatures. At Feroca, official distributor of AK Interactive in Spain, it is available with fast shipping and a guarantee of original product.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11147 |
| Range | Standard |
| Colour | Olive Green |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Finish | Satin / Matte (depending on application) |
| Application method | Brush, airbrush |
| Cleaning | Water and soap (while wet) |
What it is used for
Olive Green is one of the most sought-after shades in military modelling and fantasy miniatures. Its versatility makes it a go-to choice across a wide variety of projects:
- Base coat or colour layer on military vehicles from World War II, modern conflicts, and infantry dioramas.
- Painting uniforms and equipment on wargame miniatures (infantry, commanders, elite units).
- Backgrounds and vegetation areas in dioramas and natural environment models.
- Intermediate layers in shading and highlighting techniques (zenithal, drybrushing, glazing).
- Accessories and props in cosplay projects with a military or survival theme.
- Camouflage effects and weathering on science fiction or fantasy miniatures with a military aesthetic.
How to use it
- Surface preparation: apply a suitable primer before painting. For plastic, resin, or metal surfaces, a grey or black primer ensures better adhesion and uniformity of the Olive Green.
- Shaking: shake the bottle well for at least 30 seconds before opening. The highly pigmented formula can settle; thorough shaking is essential to achieve the correct colour.
- Thinning: for brush use, apply straight from the bottle or thin slightly with distilled water (10–20 %). For airbrush, adjust the thinning ratio according to pressure and desired effect; a common starting point is 20–30 % water.
- Application: apply in thin, even coats. Two coats are usually enough for full coverage. Allow each coat to dry before applying the next.
- Drying: touch-dry time is approximately 15–30 minutes under normal conditions. Wait at least 1 hour before applying washes, filters, or varnishes.
- Cleaning: clean brushes and airbrush immediately after use with water and soap while the paint is still wet. If it has dried, use isopropyl alcohol.
Usage tips
Get a more versatile Olive Green by mixing
Olive Green works very well as a neutral base colour over which to build layers of light and shadow. You can lighten it with more yellow or beige colours from the Standard range for highlighted areas, and darken it by adding a small amount of brown or black for deeper shadows. This allows you to create a complete lighting scheme starting from a single base colour.
Weathering techniques and wear effects
The finish of this paint takes washes and filters applied on top very well. To simulate wear on military vehicles, apply a coat of Olive Green as a base, let it dry completely, and then work over it with sponges or chipping techniques to reveal the layers beneath. A final matte varnish will seal the work and unify the finish.
Storage and preservation
Always store the bottle tightly closed, upright, and away from heat sources and direct light. If the paint thickens over time, add a few drops of distilled water, close, and shake well. Avoid using tap water, as it can alter the formula over time.
Frequently asked questions
Is this paint compatible with an airbrush?
Yes. Olive Green AK11147 is formulated for use both with a brush and an airbrush. For airbrush use, thin it with distilled water by 20 to 30 % and work at a pressure of between 15 and 20 PSI as a starting point, adjusting according to needle type and the desired effect.
Do I need a primer before applying this paint?
Using a primer is always recommended, especially on plastic, resin, and metal. Primer improves adhesion and durability of the paint, as well as ensuring that the Olive Green colour looks exactly as shown in the reference. At Feroca you will find AK Interactive primer sprays compatible with this range.
Can I mix this paint with others from the same range?
Yes, all paints in the AK Interactive Standard range are miscible with each other. You can create colour variations by mixing Olive Green with other colours from the same line to achieve exactly the shade you need for your project.
How long does it take to dry?
The touch-dry time of AK11147 is approximately 15 to 30 minutes under normal temperature and humidity conditions. To work on top with washes, filters, or a second coat, it is advisable to wait at least one hour and make sure the previous coat is completely dry.
What varnish is recommended to protect the finish?
Once the piece is finished, apply a matte varnish to unify the finish and protect the work. AK Interactive offers spray and bottle varnishes compatible with their acrylic paints, available at Feroca as the official distributor in Spain.
Is this colour suitable for painting wargame miniatures?
Absolutely. Olive Green is a shade widely used on wargame miniatures for military uniforms, tactical equipment, and camouflage elements. Its high pigmentation guarantees good coverage even in thin coats, making it especially convenient for working on the detailed surfaces of miniatures.
No reviews
Tap to zoom
