Shopping Cart
```html
```
Deep Green (AK11142) is an acrylic paint from the Standard range by AK Interactive, water-based with a high pigment concentration to achieve an intense, opaque green in a single coat. Its satin/matte finish makes it a versatile option for direct application as well as base coating and shading work. Available at Feroca, official distributor of AK Interactive in Spain.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11142 |
| Colour | Deep Green |
| Range | Standard |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Finish | Satin / Matte |
| Application | Brush and airbrush |
What it's used for
Deep Green is a versatile shade commonly used across a wide variety of modelling and miniature painting projects. Its dense pigmentation makes it especially useful when you need real coverage without building up layers:
- Military vehicles and armour with dark green finishes (field uniforms, exterior panels)
- Vegetation, foliage and natural elements in dioramas and landscape models
- Wargame figures and troops with tactical equipment or field uniforms
- Fantasy miniature details: armour, cloaks, forest creatures
- Cosplay and SFX projects where a deep, opaque green is needed on primed surfaces
- Base colour for subsequent washes, highlights and wet blending techniques
How to use it
- Prepare the surface: make sure the piece is clean, grease-free and primed. A grey or black primer will enhance the depth of Deep Green.
- Shake the bottle well: before use, shake for at least 30 seconds to homogenise the pigment.
- Apply with a brush: use the colour straight from the bottle or thin it slightly with water (10–20%) to improve flow in thin coats. Apply in smooth strokes, allowing each coat to dry before the next.
- Apply with an airbrush: thin between 20–40% with water or acrylic thinner. Work at a pressure of 15–20 psi for a uniform finish.
- Drying: touch-dry in 15–20 minutes. Allow to cure fully before applying washes, filters or varnishes.
- Cleaning: clean your brush or airbrush with water while the paint is still fresh. If it has dried, use isopropyl alcohol.
Tips and tricks
How to get the most out of Deep Green
For rich tonal variations, mix Deep Green with other colours from the Standard range while staying within the same system. Add a few drops of a lighter green for highlights or mix with black for deeper shadows. Since this is a highly pigmented paint, avoid overloading the brush — several thin coats are always preferable to one thick layer that obscures detail.
Advanced techniques with this shade
Deep Green responds very well to drybrushing once dry, especially over rough textures such as rock, earth or oxidised surfaces. It also makes an excellent base over which to apply dark washes to bring out raised details on figures or vehicles.
Storage and preservation
Close the bottle tightly after each use to prevent the paint from drying out. If you notice it has thickened over time, add a few drops of water and shake. Store in a cool place, away from direct sunlight and out of reach of extreme temperatures.
Frequently asked questions
Do I need a primer before applying this paint?
Although AK Interactive Standard acrylic paint has good adhesion, it is always recommended to prime the surface to improve durability and coverage. In the case of Deep Green, a dark grey or black primer enhances colour saturation and reduces the number of coats needed.
Can I use this paint with an airbrush?
Yes. The AK Interactive Standard range is formulated to work with both brush and airbrush. For airbrush use, thin Deep Green between 20–40% with distilled water or acrylic thinner and work at a moderate pressure of 15–20 psi.
Is this paint suitable for beginners?
Absolutely. The AK Interactive Standard range is designed to be accessible for both experienced modellers and those just starting out. Deep Green has good flow and coverage, making brush work easy without the need to over-thin it.
How long does it take to dry?
Deep Green is touch-dry in approximately 15–20 minutes under normal temperature and humidity conditions. Before applying subsequent coats or varnishes, it is advisable to wait at least 30 minutes to ensure proper curing.
What do I use to clean my tools after using this paint?
As it is a water-based acrylic paint, cleaning is straightforward: soap and water while the paint is still fresh. If it has already dried on your brush or airbrush, isopropyl alcohol is the best option for dissolving the residue.
Where can I buy this paint?
Deep Green (AK11142) is available at Feroca, official distributor of AK Interactive in Spain. You can purchase it directly from the Feroca online store with shipping across Spain and Europe.
No reviews
Tap to zoom
