Shopping Cart
```html
```
Dark Brown is an acrylic paint from the Standard range by AK Interactive, formulated with high pigmentation and a water base to provide solid, consistent coverage. Available in a 17 ml bottle, it is a versatile reference that covers everything from deep shadows on military vehicles to figure and terrain details on miniatures. Feroca, official distributor of AK Interactive in Spain, has it available for immediate shipping.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11109 |
| Range | Standard |
| Color | Dark Brown |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Finish | Satin / Matte depending on application |
| Application | Brush and airbrush |
| Cleaning | Water and soap (while still wet) |
What it is used for
Dark Brown is a dark brown with very wide use in scale modelling and miniatures. Its tone allows it to work both as a base colour and in intermediate layers for shadows and gradients. Some of its most common applications include:
- Base colour or dark undercoat on military vehicles, tracks, straps and leather equipment
- Shading of wood, earth and organic elements in dioramas and miniature bases
- Pre-shading on aircraft and vehicle models before applying the final colour
- Shadow layer painting on wargame miniatures (troops, monsters, fantasy figures)
- Representation of dry earth, dry mud or leather surfaces on cosplay figures and props
- Ageing and dirt effects on dioramas and wargame scenery
- Base for rust and corrosion effects in combination with weathering products
How to use it
- Surface preparation: make sure the piece is clean, degreased and has a suitable primer. For plastic, resin or metal, a primer coat improves adhesion and coverage of Dark Brown.
- Shaking: shake the bottle well before use, at least 30–60 seconds, to homogenise the pigment with the acrylic medium.
- Thinning: for brush application, you can apply it directly or thin it slightly with water or acrylic medium for greater fluidity. For airbrush, thin it until you achieve a skimmed-milk consistency; start with an approximate ratio of 1:1 or 1:2 (paint:thinner).
- Application: apply in thin, even coats. Dark Brown has good coverage, but several thin coats always give a better result than a single thick one.
- Drying: touch-dry time is approximately 15–30 minutes under normal conditions. Allow to dry completely before applying additional coats, washes or varnishes.
- Cleaning: clean brushes and the airbrush immediately with water and soap while the paint is still wet. Once dry, the paint is water resistant.
Usage tips
Shaking and consistency
Pigments in dark colours like Dark Brown tend to settle over time. Always shake the bottle vigorously before each session, and if you have been working for a while, stir occasionally with a toothpick or stirrer. The right consistency is key to avoiding lumps and achieving clean coats.
Use in shading and layering techniques
Dark Brown works very well as a shadow layer in areas of folds, recesses and raised details before adding lighter colours on top. It is also a good base for drybrushing techniques with warmer or orange tones over it, ideal for representing earth, weathered wood or tanned skin. If you apply it with an airbrush as a pre-shade, you can create soft gradients that add visual volume before applying the final base colour.
Combination with weathering products
Dark Brown is the perfect starting point for earth, mud and corrosion effects. Use it as a base before applying powder pigments, washes or effect products from AK Interactive. Being water-based acrylic, it is compatible with most AK range products without risk of reactivation, as long as it has been allowed to dry thoroughly or sealed with a matte varnish.
Frequently asked questions
Do I need to thin the paint before using it with an airbrush?
Yes, for airbrush use it is advisable to thin Dark Brown until you achieve a fluid consistency, similar to skimmed milk. A common starting ratio is 1:1 or 1:2 (paint:water or acrylic thinner), although this may vary depending on the pressure and type of airbrush. For brush application it can be used directly or with minimal thinning.
Can it be applied directly onto plastic without a primer?
Technically yes, but it is not recommended. Primer improves paint adhesion to the substrate and prevents coats from flaking over time or when handling the piece. For best results with Dark Brown, always apply a primer coat compatible with acrylics before painting.
How long does it take to dry completely?
Dark Brown is touch-dry in about 15–30 minutes under normal temperature and humidity conditions. To work on top with new coats, it is ideal to wait at least 30 minutes. Full curing of acrylic paint can take several hours, so if you are going to apply a protective varnish it is better to wait 24 hours.
Can I mix this paint with others from the same range?
Yes, Dark Brown is fully compatible with the rest of the paints in the AK Interactive Standard range and with other water-based acrylic ranges from the same brand. You can mix it to adjust the tone, create warmer or cooler browns, or soften the colour intensity according to the needs of your project.
Is it suitable for painting wargame miniatures?
Yes. AK Interactive's Dark Brown is perfectly valid for wargame miniatures of any material (plastic, resin, metal). Its high pigmentation provides good coverage in thin coats, which is essential to avoid losing miniature detail. It is commonly used for dark skin tones, leather, earth, wood and shadow effects.
Where can I buy this paint in Spain?
Dark Brown AK11109 is available at Feroca, official distributor of AK Interactive in Spain. You can purchase it directly from the Feroca online store, with shipping throughout Spain and Portugal.
No reviews
Tap to zoom
