Shopping Cart
Flashing Dental Spatula - Kit 4 units
206802104
€3.00
3,63 € Tax incl.
3,63 € Tax incl.
Kit of 4 flexible stainless steel dental spatulas, 14 cm. Precision tool for flashing, sculpting and retouching on clay and FX materials.
The dental spatula kit for flashing is an essential precision tool in special effects, sculpture and prosthetic makeup workshops. Its flexible stainless steel allows you to work with full control in delicate and hard-to-reach areas, especially when retouching parting lines on two-part moulds. The kit includes 4 units of 14 cm with complementary geometries to cover any finishing need.
Technical specifications
| Feature | Detail |
|---|---|
| Kit contents | 4 units |
| Length | 14 cm |
| Material | Stainless steel |
| Flexibility | Flexible |
| Resistance | High |
| Main use | Flashing, sculpting and fine retouching |
What it is used for
These spatulas are the go-to reference in FX and sculpture workshops for any work requiring precision on soft surfaces. They are especially useful for removing flashing (excess material) from two-part moulds and for defining details in modelling clays. They also have direct application in prosthetic makeup processes and general soft material sculpting.
- Flashing removal from two-part clay moulds
- Retouching and smoothing of seams and parting lines
- Detail sculpting in small or hard-to-reach areas
- Sculpture and fine texture definition
- Application and distribution of soft materials (waxes, gels, pastes)
- Prosthetic makeup and special effects work
- Adjustment and finishing of clay mould pieces
How to use it
- Select the spatula from the kit with the most suitable geometry for the area you are working on.
- If you are retouching the flashing on a two-part mould, make sure the clay is at working temperature (not too cold or excessively soft).
- Rest the spatula at a low angle on the surface and slide with gentle, constant pressure to remove or smooth the excess material.
- For highly detailed areas, work with the tip using short, controlled movements.
- Clean the blade frequently to prevent accumulated material from distorting your strokes.
- Alternate between the different spatulas in the kit depending on the shape of the area you are working on.
Usage tips
Clay temperature
Ambient temperature directly affects how the clay responds to the spatula. In winter or in cold workshops, gently warm the working area with a hair dryer held at a safe distance. Clay that is too hard forces you to apply more pressure and can create unwanted marks; too soft, and the spatula drags instead of smoothing.
Spatula maintenance
Stainless steel requires no special maintenance, but it is advisable to clean the blades thoroughly after each session. Use a soft cloth lightly dampened with isopropyl alcohol to remove clay or wax residue. Avoid leaving hardened material on the blade, as it can scratch the surface on the next use. Store them in a case or fabric roll to protect the edges.
Combining with other modelling tools
For more elaborate sculpture work, combine these spatulas with Tiranti BM Series modelling tools for concave areas and fine detail, or with the Tiranti SK Series tools for defining edges and broader planes. Combining a flat spatula with a fine-tipped tool allows you to handle virtually any retouching situation.
Frequently asked questions
What type of materials is this spatula suitable for?
This dental spatula is designed primarily for working with soft materials: modelling clays, waxes, gels and pastes. It is also useful for distributing and smoothing low-viscosity materials before they cure. It is not intended for highly abrasive or hard materials once solidified.
What is flashing in mould making and why does it need to be removed?
Flashing is the excess material that protrudes from the parting line of a two-part mould. If not properly removed before pouring the moulding material, it can prevent a perfect mould closure and cause flash on the final piece. Dental spatulas are the standard tool for removing this excess with precision without damaging the sculpture.
Are these spatulas suitable for working with silicones or resins?
Yes, as long as the material is in a paste-like or uncured state. You can use them to distribute high-viscosity silicones, fill gaps or smooth surfaces before gel. Once the material has cured, the spatula will not be effective for removing hardened excess.
How many spatulas does the kit include and are they all the same?
The kit includes 4 spatulas of 14 cm. The different blade geometries make them complementary to each other, covering everything from broad, flat areas to narrow corners and detail zones.
Can they bend or break with use?
The spatulas are made from high-strength stainless steel with a controlled degree of flexibility. They withstand continuous workshop use perfectly without permanently deforming. They are not designed to be deliberately bent to extreme angles, but within normal use they are very robust.
How should they be cleaned properly?
For most soft materials, a dry or slightly damp cloth is sufficient. For clay or wax residue, isopropyl alcohol is the cleanest option. Avoid unnecessary harsh solvents and dry the blades thoroughly before storing them to preserve the steel.
Are these spatulas suitable for professional prosthetic makeup?
Yes. Dental spatulas are a classic reference in prosthetic makeup and special effects workshops. They are used to apply and smooth character makeup materials, to work on reference sculptures and to retouch latex foam or silicone pieces before application.
Where can I get technical advice on modelling tools?
You can contact the Feroca technical team by calling 914 481 271 or writing to [email protected]. You can also reach us via social media. The team can guide you on which tools best suit your workflow.
No reviews
Tap to zoom
