Shopping Cart
Ultra Matte Varnish 60ml
AK183
€6.00
7,26 € Tax incl.
7,26 € Tax incl.
AK183 Ultra Matte Varnish by AK Interactive. Extreme matte finish, 60 ml. Protects paints and effects on scale models, miniatures and dioramas.
Available only online and at the Fuenlabrada store.
```html
```
The Ultra Matte Varnish by AK Interactive (AK183) is an acrylic protective varnish formulated to achieve the most neutral, reflection-free matte finish possible. With 60 ml of product, it seals and protects any painting work, washes and pigments on scale models, miniatures and dioramas without altering colours or leaving a milky haze. Available at Feroca, official distributor of AK Interactive in Spain.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK183 |
| Product type | Ultra Matte protective varnish |
| Volume | 60 ml |
| Base | Water-based acrylic |
| Finish | Ultra matte (reflection-free) |
| Application | Brush or airbrush |
| Cleanup | Water |
What it is used for
The AK183 is designed to seal and protect finished work whenever a completely matte result with no residual shine is required. It is especially useful in the final stages of the painting process, before or after applying pigments, filters and weathering effects.
- Final sealing of scale military vehicle, aircraft and ship models
- Protection of wargame miniatures (infantry, vehicles, creatures) after complete painting
- Intermediate coat to fix washes and filters without interfering with subsequent steps
- Base layer for applying powder pigments so they do not slip off
- Final finish on dioramas and figures where shine would ruin realism
- Protection of acrylic finishes on cosplay pieces or SFX props that require an opaque appearance
How to use it
- Preparation: Make sure the surface is completely dry and free of dust. Shake the bottle well for at least one minute before use.
- Thinning (airbrush): If you apply it with an airbrush, you can thin it slightly with distilled water or acrylic retarder for a more even application. Try a ratio of 10–15% water as a starting point.
- Application (brush): Using a flat, soft brush, apply thin, even coats and avoid going over the same area repeatedly to prevent lifting previous layers.
- Drying: Allow 30 to 60 minutes to dry under normal temperature and humidity conditions before handling the piece. For optimum protection, wait at least 24 hours before applying additional layers of effects or pigments.
- Cleanup: Clean the brush or airbrush immediately after use with running water.
Usage tips
Thin coats, always
Apply several thin coats rather than a single thick one. An overly thick coat can produce a slight whitish or "milky" effect when drying, especially on dark surfaces. Two or three light passes guarantee even, problem-free coverage.
Environmental conditions
Avoid applying the varnish in very high relative humidity or at temperatures below 15 °C. Under these conditions drying slows down and the risk of a milky finish increases. The ideal working range is 18–25 °C with humidity below 70%.
Order of the working process
If your workflow includes washes, filters and pigments, use the AK183 as an intermediate coat between each phase. This protects what has already been painted, provides a suitable grip surface for subsequent steps, and ensures the final result is completely matte and uniform.
Frequently asked questions
Can it be applied with an airbrush?
Yes. The Ultra Matte Varnish AK183 works perfectly with an airbrush. Thin it slightly with distilled water (10–15%) and work at a medium pressure of between 15 and 20 psi for even coverage without excessive overspray.
Does the matte varnish yellow over time?
The water-based acrylic formulation of the AK183 is designed to resist yellowing. As long as you store the finished pieces protected from direct ultraviolet light and in stable temperature conditions, the finish will remain neutral for years.
Can I apply powder pigments on top of the varnish?
Yes, and in fact it is one of its best uses. The ultra matte finish of the AK183 creates a slightly porous surface that holds powder pigments without the need for additional fixatives. It is the standard method for adding earth, dust and rust effects to military vehicle models and dioramas.
Is it compatible with acrylic paints and enamels?
The AK183 is fully compatible with water-based acrylic paints. If you apply it over enamel layers, make sure these are completely dry and cured (at least 24–48 hours) to avoid any reaction between coats.
How many coats are needed for adequate protection?
In most cases, two thin coats are sufficient to protect the piece against normal handling. If the piece will be subject to heavier wear (wargame miniatures that are constantly moved, cosplay pieces), a third coat adds protection without affecting the matte finish.
Where can I buy the Ultra Matte Varnish AK183 in Spain?
The AK183 Ultra Matte Varnish is available at Feroca, official distributor of AK Interactive in Spain. You can purchase it directly from the Feroca online store with shipping throughout mainland Spain and beyond.
No reviews
Tap to zoom
