Shopping Cart
```html
```
Xtreme Metal Copper by AK Interactive is an ultra-high-quality metallic paint specifically formulated for modellers seeking an authentic, bright, and realistic copper finish. Developed with cutting-edge pigments, it offers exceptional coverage, maximum shine, and outstanding resistance to both weathering and subsequent varnishing. Available in a 60 ml format, you can find it at Feroca, the official AK Interactive distributor in Spain.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK473 |
| Range | Xtreme Metal |
| Colour | Copper |
| Volume | 60 ml |
| Base | Solvent |
| Finish | Ultra-gloss metallic |
| Coverage | Ultra-high |
| Prior primer | Not required |
| Varnish compatible | Yes, without altering the shine |
| Plastic compatibility | Does not damage plastic |
What it is used for
Xtreme Metal Copper is designed for any application where you need a convincing and long-lasting copper metallic finish. Its high-gloss formulation makes it a reference within AK Interactive's Xtreme Metal range for work that demands extreme realism:
- Scale models of vehicles, aircraft, and ships with copper or brass parts (pipes, valves, exhausts, instrumentation).
- Fantasy and science fiction miniatures with armour, weapons, or accessories in copper-toned metal.
- Dioramas and military figures where metallic detail makes all the difference.
- Wargame pieces (Warhammer and similar) that require aged or polished metal effects.
- Cosplay: application on foam, resin, or plastic pieces to simulate real metal without the need for primer.
- Special effects (SFX) and film props where a high-fidelity copper finish is required.
- Decoration and art in general on rigid surfaces that need a permanent metallic finish.
How to use it
- Surface preparation: Make sure the piece is clean, dry, and free of dust or grease. Although Xtreme Metal Copper does not require primer, applying a matt black base coat can intensify the final metallic shine even further.
- Shaking: Shake the bottle thoroughly for at least 1–2 minutes before use. The high-pigment formula tends to settle, and thorough shaking is essential to achieve the correct colour.
- Airbrush application: Apply directly without thinning or with a small proportion of thinner specific to solvent-based paints. Work in thin, even coats at medium pressure (15–20 PSI). Keep a distance of 10–15 cm from the surface.
- Brush application: It can be used with a synthetic-hair brush for specific details. Apply with soft, quick strokes to avoid brush marks on the glossy finish.
- Drying: Touch-dry time is quick. Allow to dry completely before handling the piece or applying additional coats.
- Varnishing: You can varnish with a compatible varnish without the glossy finish being affected, which allows washes or weathering effects to be applied on top in a controlled manner.
- Cleaning: Clean the airbrush or brush immediately after use with thinner for solvent-based paints.
Usage tips
Get maximum shine with a black base
Although Xtreme Metal Copper can be applied directly onto plastic without primer, applying a matt black coat beforehand will give you a darker starting point that greatly enhances the metallic effect. The contrast between the black base and the Copper creates that characteristic depth of real metals.
Coat control and thinning with an airbrush
The high pigmentation of this paint means that a single coat can already be sufficient in many cases. If you apply with an airbrush, start with a thin coat and assess the coverage before adding more. Over-thinning can reduce the characteristic shine of the Xtreme Metal range, so be moderate with the thinner.
Weathering effects and patina on Copper
Copper is one of the metals that reacts best visually to ageing. Once the Copper coat is dry and varnished, you can apply greenish or brown washes to simulate oxidation and the classic patina of exposed copper. The paint's weathering resistance ensures that the metallic base remains intact under any ageing technique.
Frequently asked questions
Is it necessary to use primer before applying this metallic paint?
No. Xtreme Metal Copper (AK473) is formulated to adhere directly to plastic, resin, and metal without the need for prior primer and without damaging the surface. However, a prior matt black base coat can improve the visual effect of the glossy finish.
Can I varnish over it without losing the metallic shine?
Yes. One of the advantages of AK Interactive's Xtreme Metal range is that it accepts varnishing without the glossy finish being altered. Use a varnish compatible with solvent-based paints for best results.
What type of thinner should I use to clean the airbrush?
As it is a solvent-based paint, you must clean the airbrush and brushes with thinner specific to solvent-based paints. Do not use water or alcohol, as they are not effective for this type of formulation.
Can it be applied with a brush or only with an airbrush?
Xtreme Metal Copper can be applied both with an airbrush and with a brush. The airbrush offers more uniform results and maximises the shine, but the brush is perfectly valid for details and spot touch-ups. Use a synthetic-hair brush with quick, light strokes.
Is it suitable for use in cosplay and foam pieces?
Yes. Xtreme Metal Copper is widely used in cosplay and SFX projects on materials such as foam, resin, and plastic. As it does not require primer and does not damage plastic, it is very practical for these applications. Always check compatibility with the specific material you intend to use.
Where can I buy this paint in Spain?
Xtreme Metal Copper (AK473) is available at Feroca, the official AK Interactive distributor in Spain. You can purchase it directly from their online store with a guarantee of original product.
No reviews
Tap to zoom
