Shopping Cart
```html
```
Fluorescent Orange (AK11081) is an acrylic paint from the Standard range by AK Interactive in 17 ml format. Its formula uses a special semi-transparent fluorescent resin that preserves the full intensity and vibrancy characteristic of fluorescent colours. To achieve the best results, it is essential to apply it over a white surface or with a light primer, as the semi-transparent nature of the resin depends on that base to express its full chromatic potential. Available at Feroca, official distributor of AK Interactive in Spain.
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AK11081 |
| Range | Standard |
| Colour | Fluorescent Orange |
| Volume | 17 ml |
| Base | Water-based acrylic |
| Finish | Satin |
| Resin type | Semi-transparent fluorescent |
| Recommended surface | White or light-primed |
| Application | Brush and airbrush |
| Cleaning | Water and soap (wet tools) / acrylic thinner (dry) |
What it is used for
Fluorescent Orange is a high visual impact colour that covers a wide range of uses within scale modelling, miniatures and artistic characterisation. Its fluorescent nature makes it especially effective in any application where you want to draw attention to a specific detail or achieve a supernatural lighting effect.
- Signage and warning markings on military vehicles, aircraft and scale civilian models
- Neon elements, energy, magic or fire on wargame and role-playing game miniatures
- Lava, plasma or alien technology effects on dioramas and scenery
- Fluorescent accessories and details on cosplay costumes and props
- Special effects (SFX) on fantasy, science fiction and horror models
- Safety vests, cones or signs on civil or urban-themed dioramas
- Highlighting illuminated areas (Object Source Lighting) on hand-painted figures
How to use it
- Surface preparation: Apply a white primer or a coat of opaque white paint to the piece. This step is essential with Fluorescent Orange: the fluorescent resin is semi-transparent and without a light base you will lose all the colour's intensity.
- Shaking: Shake the bottle well for at least 30 seconds before use. Fluorescent pigments tend to settle.
- Thinning: For brush application, you can use the paint directly or thin it slightly with distilled water. For airbrush, adjust the consistency with distilled water or acrylic thinner until you achieve the right flow for your nozzle.
- Application: Apply in thin, successive coats. The first coats may appear poorly covering due to the semi-transparent nature of the resin; this is normal. The fluorescent intensity builds up with 2–3 coats.
- Drying: Touch-dry time occurs within a few minutes under normal conditions. Wait for each coat to be completely dry before applying the next one.
- Cleaning: Clean brushes and the airbrush with water and soap if the paint is still wet. If it has dried, use acrylic thinner.
Usage tips
A white base is not optional
With fluorescent resin colours, the base they are applied over directly determines the final result. On grey plastic or dark primer, Fluorescent Orange will lose all its vibrancy and appear dull or muddy. A prior coat of white — whether from a spray can or opaque paint — makes the difference between a vivid orange and a disappointing result.
Thin coats for maximum fluorescence
Unlike what happens with opaque paints, loading the brush with too much paint in a single pass does not improve coverage. With Fluorescent Orange it is better to build the colour progressively: several thin coats over a white base give a more even and more intense finish than a single thick coat. Allow each coat to dry completely before applying the next.
Combining with varnishes and OSL
If you are going to apply a final protective varnish, bear in mind that matte varnishes can slightly reduce the fluorescent effect. To preserve the vibrancy, opt for a satin varnish. On the other hand, Fluorescent Orange is an excellent colour for Object Source Lighting (OSL) techniques: use it on the most illuminated areas of a warm light source and blend it towards darker tones to create a convincing light emission effect.
Frequently asked questions
Why does this paint seem poorly covering in the first coats?
Fluorescent Orange uses a special fluorescent resin that is semi-transparent by design. This characteristic is precisely what gives it its fluorescent vibrancy and brightness. Coverage is achieved with 2–3 thin coats over a white base, not with a single thick coat.
Is it essential to use a primer before applying this type of paint?
With Fluorescent Orange it is especially important. AK Interactive recommends always applying it over a white surface or with a light primer. Without that base, the semi-transparent nature of the resin causes the final colour to appear dull and lose its fluorescent properties.
Can this paint be used with an airbrush?
Yes. Fluorescent Orange from the AK Interactive Standard range is suitable for both brush and airbrush. For airbrush, thin with distilled water or acrylic thinner until you achieve the right consistency for your nozzle. It is recommended to start with moderate dilutions and adjust accordingly.
How do you clean up after using this paint?
Being a water-based acrylic paint, cleaning is straightforward. If the brushes or airbrush are still wet, water and soap are sufficient. If the paint has already dried, use acrylic thinner.
Is this paint compatible with varnishes and topcoats?
Yes, Fluorescent Orange is compatible with water-based acrylic varnishes. Bear in mind that matte varnishes can reduce the vibrancy of the fluorescent effect, so a satin varnish is recommended if you want to preserve the full impact of the colour.
Where can I buy this paint in Spain?
Fluorescent Orange (AK11081) is available at Feroca, official distributor of AK Interactive in Spain. You can find it in the Feroca online shop alongside the entire Standard range and the rest of the AK Interactive catalogue.
No reviews
Tap to zoom
