Shopping Cart
```html
```
The Playmarker Desert Ochre (AKM021) is a water-based acrylic paint marker by AK Interactive with a desert ochre tone and a satin finish, designed for modellers and wargame players looking for speed and precision without compromising on quality. Its felt tip and high-coverage formula make it easy to work on plastic, resin, metal and wood. Feroca, official distributor of AK Interactive in Spain, has it available
Technical specifications
| Parameter | Value |
|---|---|
| Reference | AKM021 |
| Product type | Acrylic paint marker |
| Colour | Desert Ochre |
| Base | Water-based acrylic |
| Approximate volume | ~5 ml |
| Tip | Brush-type felt tip |
| Finish | Satin |
| Compatible surfaces | Plastic, resin, metal, wood |
| Resistance | Water, heat and handling resistant |
What it is used for
Desert Ochre is a key colour in military and science fiction modelling, found on vehicles from North Africa, the Middle East and arid environments in general. Its satin finish makes it versatile for both base coats and intermediate effects.
- Base colour for military vehicles in desert theatres (tanks, half-tracks, armoured vehicles)
- Painting wargame miniatures with arid or post-apocalyptic settings
- Quick highlighting and shading on desert dioramas
- Touch-ups and corrections on scale models
- Colour sketches and colour scheme tests before airbrushing
- Cosplay and SFX applications on prepared surfaces
How to use it
- Surface preparation: Apply a white primer to the piece before using the Playmarker. This ensures better adhesion and allows the Desert Ochre colour to show its full, true saturation.
- Shaking: Shake the marker vigorously for a few seconds to homogenise the paint inside.
- Priming the tip: Press the tip against a test surface until the paint flows evenly through the felt.
- Application: Paint with smooth, controlled strokes. You can apply several coats, allowing each to dry in between, to increase coverage or create tonal variations through glazing.
- Blending and transitions: While the paint is still wet, blend with other Playmarker references to achieve transitions and lighting effects.
- Drying: Drying is quick. Allow to dry completely before applying weathering effects or varnishes.
- Varnishing: You can apply any type of varnish (matt, satin or gloss) without any risk of damaging the paint.
- Cleaning: Clean the tip with a damp cloth or water if needed. The marker is refillable and the tip is.
Tips and tricks
White primer for best results
Although the Playmarker Desert Ochre has good coverage, always using a white base before applying it maximises the fidelity of the ochre tone and reduces the number of coats needed. AK Interactive's primer sprays are a straightforward and convenient option for this step.
Make the most of the quick drying for successive coats
The quick drying of the water-based acrylic formula allows you to add coats in a short time. Use this to your advantage to create light and shadow variations by applying more diluted coats (with light pressure on the tip) over highlighted areas, and heavier coats in shadow areas.
Weathering without worry
Once dry, the paint resists water, heat and handling, making it fully compatible with subsequent weathering techniques: washes, pigment powders, chipping or filters. It is not necessary to apply an intermediate protective varnish before weathering, although doing so gives greater control over the final result.
Frequently asked questions
Do I need a primer before using this type of marker?
It is recommended to apply a white primer before using the Playmarker Desert Ochre to get the maximum colour performance and optimal adhesion. Without primer, coverage may be lower and the tone may be affected by the surface colour.
Is it compatible with weathering techniques and products?
Absolutely. Once dry, the Playmarker Desert Ochre withstands washes, pigments, filters and other weathering products without lifting. You can apply an intermediate protective varnish if you wish, but it is not essential.
Can it be used with an airbrush or only with a brush?
The Playmarker is formulated to be applied directly with its brush-type felt tip. It is not intended for use with an airbrush in its original form, although the paint inside is water-based acrylic and could be thinned for other experimental uses. For airbrushing, the AK Interactive Standard range is the recommended option.
What is the final finish and can I change it?
The Playmarker Desert Ochre has a satin finish due to the nature of its pigments. If you prefer a matt or gloss finish, you can apply any finishing varnish over the dry paint without any issues. The formula is compatible with all types of varnishes.
Where can I buy this product in Spain?
The Playmarker Desert Ochre (AKM021) is available from Feroca, the official AK Interactive distributor in Spain, both in their online store and through their specialist distribution network for modelling and wargames.
No reviews
Tap to zoom
