LOW-COST SILICONE

LOW-COST SILICONE is a two-component silicone elastomer (Parts A and B) that cures at room temperature. The base (Part A) has the appearance of a viscous liquid which, after addition of the LOW-COST SILICONE Part B catalyst, transforms into an elastic material. It is noted for its exceptional fluidity and easy handling.

LOW-COST SILICONE Molding Silicone offers excellent value for money. It is our standard silicone and works effectively in any type of mold.

Applications

LOW-COST SILICONE is ideal for the manufacture of molds for casting:

• Plaster
• Polyester Resin
• Polyurethane Resin
• Epoxy resin
• Fiberglass
• Wax
• Soap
• Bronze

Thanks to its low viscosity and softness, it is perfect for molds with complicated hollows and difficult to demold.

Technical Characteristics

• Working time at 25ºC: 25 minutes
• Curing time at 25ºC: 6 hours
• Shore hardness: A25

Instructions

1. Prepare the box for the mold and the original.
2. Mix 100 parts of base (Part A) with 5 parts of catalyst (LOW-COST SILICONE Part B). Make sure to obtain a homogeneous mixture.
3. Pour the silicone into the mold box or apply with a brush if the mixture has been thixotropic previously.

Note: It is recommended to use low hardness silicone for casting molds, as it facilitates demolding and protects the original.