Shopping Cart
Old Age Stipple - Wrinkled Old Skin Simulation
272110006
€11.00
13,31 € Tax incl.
13,31 € Tax incl.
Old Age Stipple, liquid latex to simulate aged and wrinkled skin. Sponge application, fast drying. 50 ml pot.
Old Age Stipple is a liquid latex solution specifically formulated to create aged and wrinkled skin effects on natural skin. It is applied in successive layers with a sponge while stretching the skin, generating realistic wrinkle effects when released. It is the standard tool in special effects makeup for quick and convincing aging.
Technical specifications
| Feature | Detail |
|---|---|
| Product type | Latex solution for FX makeup |
| Effect | Aged and wrinkled skin |
| Application method | Latex sponge or makeup sponge |
| Capacity | 50 ml |
| Drying | Air dry or with a hair dryer |
| Finish | Matte, compatible with rubber/latex paints |
| Removal | Gentle mechanical peeling from skin |
What it is used for
Old Age Stipple is the essential tool for skin aging in film, television, theatre and artistic makeup productions. It allows you to simulate decades of aging in minutes without the need for complex prosthetics. Among its most common applications:
- Quick aging of hands, neck and face in audiovisual productions
- Character portrayal of elderly characters in theatre and events
- Effects of damaged, weathered or sun-beaten skin
- FX makeup practice in courses and professional training
- Localised wrinkle effects for specific areas (forehead, eyelids, corners of the mouth)
- Complement to base makeup to reinforce age characterisations
How to use it
- Clean and thoroughly dry the area of skin where you are going to apply the product. The skin must be free of grease, creams or makeup residue.
- Stretch the skin with your fingers (thumb and index finger) in the opposite direction to the natural wrinkles you want to achieve.
- Using a latex sponge or makeup sponge, apply a thin layer of Old Age Stipple over the stretched area. Use small dabbing motions — do not rub.
- Allow to dry completely. You can speed up the process with a hair dryer at medium temperature.
- Without releasing the skin, apply mattifying powder with a soft brush to set and eliminate shine.
- Release the skin slowly: as it relaxes, the latex wrinkles to form the aged skin texture.
- Repeat the process in successive layers until you achieve the desired level of aging. Each layer adds depth and realism.
- Colour if necessary with paints specifically formulated for rubber or latex to match the tone with the rest of the makeup.
- To remove the product, carefully peel the latex from the edges, pulling gently without tearing the skin.
Warning — latex-based product: Not suitable for people with natural latex allergy. Always perform a patch test on a small area of skin before applying to larger areas. Avoid contact with eyes and mucous membranes. In case of irritation, remove the product immediately and consult a healthcare professional. Keep out of reach of children.
Usage tips
Number of layers and stretching direction
The secret to a good aging effect with Old Age Stipple lies in building up layers and slightly varying the stretching direction with each one. With two or three layers you will achieve surface wrinkles; with four or more, you will get a much more pronounced texture closer to very aged skin. Make sure each layer is completely dry before applying the next: if you layer wet latex over wet, the final texture will be uneven and unconvincing.
Finish and makeup
Dry latex has a slight sheen that must be eliminated for the effect to look convincing. Use Fleet Street DirtWorks powder with a soft brush after each layer. To colour the treated area and blend it with the rest of the makeup, use only paints formulated for rubber or latex: conventional paints do not adhere well and will crack. You can add touches of dark shadow in the folds to enhance the depth of the wrinkles.
Removal without irritating the skin
To remove Old Age Stipple, do not pull sharply or on dry skin. Lightly moisten the edges of the latex with warm water to ease removal, and peel it off with slow movements from the perimeter inward. Avoid using acetone or other harsh solvents on the skin. If the area is large or has adhered strongly, apply a few drops of baby oil to the edges and wait a minute before removing.
Frequently asked questions
How many layers are needed for a convincing aging effect?
It depends on the degree of aging you are looking for. With two or three layers of Old Age Stipple you achieve a soft wrinkle effect, suitable for middle-aged characters. To simulate a very elderly person, the usual approach is to apply between four and six layers, slightly varying the stretching direction with each one. Each layer must be completely dry before applying the next.
Can it be used on any area of the body?
Old Age Stipple works best in areas where the skin has mobility and can be easily stretched: forehead, eyelids, cheeks, neck, back of the hands and forearms. Avoid applying it near the eyes, lips or mucous membranes. In areas with abundant hair, removal can be uncomfortable.
Is it suitable for sensitive or allergy-prone skin?
Old Age Stipple contains natural latex, so it is not suitable for people with a documented latex allergy. If you are unsure of your sensitivity, always perform a patch test on a small area (inner forearm) and wait at least 20 minutes before applying to larger areas. At any sign of a reaction, remove the product immediately.
How do you colour the latex once it is dry?
Use only paints formulated for rubber or latex. Conventional acrylic paints do not adhere well to flexible latex and tend to crack with movement. For tone touch-ups, powder makeup eyeshadows also work well when applied with a brush over dry, mattified latex.
How long does it take to dry between layers?
At room temperature, each layer of Old Age Stipple takes between 3 and 5 minutes to dry completely. You can speed up the process with a hair dryer at medium-low temperature, which reduces the time to 1–2 minutes per layer. Never apply excessive heat directly to the skin.
Which powders can be used to mattify and eliminate shine?
Fleet Street DirtWorks powder is a highly regarded option in FX environments because, in addition to eliminating latex shine, it allows you to add dirt, aging and colour degradation in a controlled way. You can also use translucent conventional makeup powder if you simply want to mattify without adding tone.
Can it be used for effects other than aging?
Yes. Although its main use is aging, Old Age Stipple can also be used to create effects of dehydrated, weathered, burned or damaged skin. By varying the stretching tension and direction of application you can achieve different textures that complement other FX effects.
What should I do if the product has thickened in the pot?
Latex can thicken if the pot is not closed properly or if it has been exposed to low temperatures. In that case, add a few drops of distilled water, close the pot and shake gently until the original consistency is restored. Never use solvents to dilute it. Always store the pot tightly closed, in a cool place away from direct light.
No reviews
Tap to zoom
