PolyColor Dyes 56gr. can. -Special pigments for polyurethane
22,99 € IVA incl.
PolyFoam F-5 is a two-part flexible polyurethane foam from casting.
This self-adhesive foam has a free-rise density of 80Kg/m³, and offers a good level of surface detail and mold fill.
This foam is perfect for the production of accessories, tools and any decorative, functional or artistic object that must be flexible and lightweight.
In general, PolyFoam products should be molded in PlatSil silicone molds.
These foams can also be poured into urethane rubber molds.
Polytek foams can be pigmented with the Polycolor® series of pigments
Product | Mixing ratio | Mixing viscosity | Cream time | Foaming time | Tack-free time |
Release time |
Free-Rise Density | Molded density |
PolyFoam F-3 |
1A:2B by weight or volume |
2000 cP | 25 sec |
1.5 min. |
3 minutes |
10 minutes |
48 Kg/m³ |
80-128 Kg/m³ |
PolyFoam F-5 |
1A: 1B by weight or volume |
1400 cP | 45 sec |
3-5 min |
25 minutes |
30-60 min |
80 Kg/m³ |
128-240 Kg/m³ |
* Depending on mass and ambient temperature
You might also like