18,00 € IVA incl.
Worbla's Crystal Art. Transparent Thermoplastic in Microspheres
8,47 € IVA incl.
- Transparent thermoplastic in re-usable microspheres.
- Heat to 110 ºC to activate.
- Ideal for cosplay, scenography and make-up FX.
- works on silicone or rigid plastic molds.
Worbla's Crystal Art is a thermoplastic microspheres that require an activation temperature of 110 ºC compared to Worbla Finest Art (WFA) which requires 90 ºC. It is a perfect material for modeling and for making final pieces as it has no shrinkage in the hardening process, which will give your creations a high reliability.
The material has no solvents in its composition and hardens in about 10 minutes, and remains transparent once hardened, and you can re-use it at any time. In addition, Worbla's Crystal Art can be mixed directly with an acrylic paint in its most malleable state so that when it dries and hardens, the piece will have the same color.
Very easy to use:
- Separate the amount of Worbla's Crystal Art you want and heat it up to 110 ºC with the help of hot air or water. If heated with a torch it will lose its shine.
- Do not mix too much at a time as this produces air bubbles. To remove them, place the mixture on a baking paper and smooth it with a rolling pin.
WORBLA TUTORIAL by MANLIMA COSPLAY
You might also like