ALADUR 9 - Escayola Para...

ALADUR 9 - Escayola Para Reproducciones Alto Detalle

210072001
€7.00
8,47 € IVA incl.
  • Special plaster reproductions.
  • High detail.
  • Very high resistance and low absorption plaster.
  • Ideal for the manufacture of models that require great hardness.
  • Ceramic white.
  • Mix 2:1 Powder/Water.
weight
  • 1.5 kg.
  • 6 Kg
  • 20 kg

 

MIXTURE: We recommend the plaster/water ratio indicated below. Working with less water increases the resistances, but the time available for casting will be shorter.

Pour the plaster into the water (never the other way around), let it moisten and knead it for about one minute, beating gently and uniformly to avoid the formation of air bubbles.

The containers must be clean.

STORAGE: In dry places on wooden battens, separating the different rows from each other and from the wall so that the air can circulate freely. In this way the plaster can be stored for months while retaining its properties.

TECHNICAL DATA:
Mixing ratio: 2 kg of plaster per 1 liter of water.
Setting time: 10 - 12 minutes
Demolding: From 28 - 30 minutes
Setting expansion: 0,20 %
Brinell hardness: 650 Kg/cm2
Color: White
GRANULOMETRIC DISTRIBUTION:
Greater than 200 microns: Traces
Greater than 86 microns: 0,5 %
SOLUBILITY OF THE DIHYDRATE AT 20 ºC: 2.1 g/liter

PDF_LITE25.png TECHNICAL DATA SHEET
PDF_LITE25.png SAFETY DATA SHEET

No reviews
Product added to wishlist
Cookie consent