TRANSLUX D151 FAST -Epoxi Transparente Rápida-

TRANSLUX D151 FAST -Rapid Clear Epoxy-

405617001
€39.00
47,19 € IVA incl.
  • Low viscosity. High transparency.
  • Perfect for Jewelry.
  • Easy bubble elimination.
  • High transparency.
  • Very good UV resistance.
  • Rapid version of Translux D150
capacity
  • Kit 1.5 Kg.
  • Kit 7.5 Kg.
  • Kit 37.5 Kg.

 

APPLICATION

Mix the resin and the hardener with the ratio 2 parts A to 1 part B by weight. Mix until a perfect homogeneity is obtained. It is possible that during mixing, a certain yellow shade may appear but the material will become colorless as it polymerizes.

For a clear epoxy resin, Tranlux D151 is considerably fast and in less than 24 hours at room temperature the part will be ready for demolding. In thin thicknesses of less than 2mm, times can be extended.

Ideal for occlusions, jewelry, transparent effects in furniture, etc.

Remember that it is characteristic of this resin that at low temperatures its viscosity increases, even producing a granular effect, similar to what happens with olive oil or honey. This does not mean that the resin has degraded, but it cannot be used in this state because the catalyst would not react with these balls and whitish areas without catalyst would appear. As in the previous cases, the effect disappears by approaching the product to a heat source (radiator) or subjecting it to the "water bath" and waiting until the resin cools and recovers the temperature of use, between 20 and 25ºC

CHARACTERISTICS:

-Resistant to UV rays

-Excellent fluidity, which minimizes the appearance of bubbles.

-It is recommended to use in layers in the case of thick and large parts.

-Hardness: 100 Shore A - (Measured after curing for 16 hours at 60ºC.)

-Curing Time - 24 hours at 25ºC. About 10 hours if we bring the resin close to a heat source (radiator)

MIXTURE IN VOLUME:

-2 parts TRANSLUX D150A

-1 part of TRANSLUX D151B

APPROXIMATE CONSUMPTION:

- 1 kg per m2 for 1 mm layer.

Product Mixture A:B
Color Demolding time
Working time
Viscosity Shore Hardness
Density
TRANSLUX D151 FAST 2A:1B by weight

Transparent

24 hours at 25ºC 6 hours at 25ºC

220 mPa.s.

100A 1,05

READ CAREFULLY THE INSTRUCTIONS AND THE SAFETY DATA SHEET LOCATED IN THE FLAP TECHNICAL DOCUMENTS

clic adjuntos

PRECIOUS STONES WITH EPOXY RESIN

HOW TO MAKE A PENDANT WITH EPOXY RESIN

DIORAMA OF TITANIC WITH EPOXY RESIN

Color
Transparent
Working Time
6horas
Curing Time
24horas
Shore Hardness
100A
Mixed Weight Ratio
100A:50B
Application
Casting
Jewelry
No reviews

You might also like

Product added to wishlist
Cookie consent