Syringe
0,73 € IVA incl.
3D-SMOOTHER from Feroca is an epoxy coating that smoothes, protects and gives a perfect finish to your parts made with 3D printers.
Very easy to use, mix its two liquid components(2A:1B in Volume) and apply them to any 3D part with the help of a brush or brush. 3D-SMOOTHER by Feroca is self-leveling so it will not leave traces or brush strokes.
3D-SMOOTHER by Feroca has a working time of 10 minutes and a curing time of approximately 4 hours, depending on the amount mixed and the ambient temperature.
3D-SMOOTHER by Feroca cures to a hard, impact resistant coating and can be easily sanded, primed and painted. Adding colors and metallic effects is very simple.
Very economical: 28 grams of Feroca's 3D-SMOOTHER covers more than 250 cm².
90% savings in time and labor: Feroca 3D-SMOOTHER penetrates into the grooves left by 3D printing and creates a smooth, high-gloss finish. Rework of the workpiece is almost unnecessary.
Suitable for all types of 3D printing:Feroca 3D-SMOOTHER can be applied to SLA and SLS 3D prints. It works perfectly with ABS, PLA, Laywood (wood polymer), Powder and other rigid materials. It can also be used to coat EPS or EPDM (polyethylene) as well as polyurethane foam, wood, plaster, fabrics, cardboard and paper.
feroca's3D-SMOOTHER contains no VOCs (volatile organic compounds), Phthalates or Phosphates.
Each kit includes the following:
TECHNICAL DATA SHEET | ||
SAFETY DATA SHEET PART A | ||
SAFETY DATA SHEET PART B |
JUAN VILLA TEACHES YOU HOW TO USE 3D-SMOOTHER
You might also like